Dan's bagger project
Thread Starter
|
Road Master
Joined: May 2008
Posts: 1,065
Likes: 1
From: Madison, WI
Dan's bagger project
New pics with pinstripes post #26 (8-17-2010)
New pics with bags on post #16. (8-6-2010)
New pictures on post #9. (3-30-2010)
Here are are few pictures of my brother's police bike to custom bagger project. Some and ideas came from here, some from magazines, some from day dreams.
He bought the white 2009 Roadking in November and stripped it to the frame and motor. Sold most of the take off parts on ebay and started buying and building. This is not a big buck build, but we have had to buy some new parts to keep the project going.
It is only about half painted right now and this was not the final assembly, but you will get the idea of where he is going for a look. The stock bars look out of place right now, so if you have an idea, chime in.
Besides the bars, we are still searching for the right bags, floorboards (likely streamliner), front rotors.
He has joined HDForum this week an will hopefully get rolling with some posts on this thread. He is Wisconsin Dan.
New pics with bags on post #16. (8-6-2010)
New pictures on post #9. (3-30-2010)
Here are are few pictures of my brother's police bike to custom bagger project. Some and ideas came from here, some from magazines, some from day dreams.
He bought the white 2009 Roadking in November and stripped it to the frame and motor. Sold most of the take off parts on ebay and started buying and building. This is not a big buck build, but we have had to buy some new parts to keep the project going.
It is only about half painted right now and this was not the final assembly, but you will get the idea of where he is going for a look. The stock bars look out of place right now, so if you have an idea, chime in.
Besides the bars, we are still searching for the right bags, floorboards (likely streamliner), front rotors.
He has joined HDForum this week an will hopefully get rolling with some posts on this thread. He is Wisconsin Dan.
Last edited by WI Bob; Aug 17, 2010 at 09:30 PM.
Tourer
Joined: Aug 2009
Posts: 266
Likes: 0
From: central illinois
Great look
I have always wanted to do what you guys are doing! It looks great already, I can almost see it done myself.
Keep up the great work, andplease keep us posted with more pics as the bike progresses.
Keep up the great work, andplease keep us posted with more pics as the bike progresses.
The bike is looking sweet as well.
Thread Starter
|
Road Master
Joined: May 2008
Posts: 1,065
Likes: 1
From: Madison, WI
Roger on the more snow and time. ;-)
Road Warrior
Joined: Jul 2007
Posts: 1,289
Likes: 6
From: Mayfield Ohio
Trending Topics
Thread Starter
|
Road Master
Joined: May 2008
Posts: 1,065
Likes: 1
From: Madison, WI
We got it rolling on Sunday. There are chrome heat shields for the exhaust that we had off at the time of the test ride.
And the stretched hard bags are still in the shop that will match the stretched rear fender. Otherwise, just a little pin striping, new mirrors, and she is ready.
I will do a parts list later.
And the stretched hard bags are still in the shop that will match the stretched rear fender. Otherwise, just a little pin striping, new mirrors, and she is ready.
I will do a parts list later.
