Sohotbikes wedge
#42
When I ordered the 39929-06A, I received a 39929-06B.
#43
#45
I know this is an older thread but thought I would revive it to get some more feedback on the soho tensioner,I installed one on my 07 rg and it wouldn't tension up at all so I tore it apart again and inspected the unit and what I found was that the check ball was sticking on the seat you could stick a small screw driver in and pop it off the seat but once you put pressure on the ball which is what happens with the hydraulic action it would stick on the seat again,so with the ball sticking on the seat there was no way for the unit to get oil in the cylinder so the hydraulics could work properly.
What I did was take the check ball and spring out,I cut a cue tip in half and put it in a drill and put some metal polish on it and polished up the tapered seat until the ball didn't stick anymore,I then put it back together and it seems to be working fine now but I won't trust it until spring comes and I am able to put some miles on it to see if it will keep working.
What I did was take the check ball and spring out,I cut a cue tip in half and put it in a drill and put some metal polish on it and polished up the tapered seat until the ball didn't stick anymore,I then put it back together and it seems to be working fine now but I won't trust it until spring comes and I am able to put some miles on it to see if it will keep working.
#47
Here's what I posted on another thread just today.
I have had nothing but trouble with the wedge 2 in my 2008 SG. I have tried repairing the one I have per there instruction, but it did not work. The primary is louder than ever. I have requested a replacement or refund. You will find others here that have experienced the same quality control problem as I have.
We will see what they have to say.
#48
Hey Larry, it was nice meeting you and the wife last week.
Here's what I posted on another thread just today.
I have had nothing but trouble with the wedge 2 in my 2008 SG. I have tried repairing the one I have per there instruction, but it did not work. The primary is louder than ever. I have requested a replacement or refund. You will find others here that have experienced the same quality control problem as I have.
We will see what they have to say.
Here's what I posted on another thread just today.
I have had nothing but trouble with the wedge 2 in my 2008 SG. I have tried repairing the one I have per there instruction, but it did not work. The primary is louder than ever. I have requested a replacement or refund. You will find others here that have experienced the same quality control problem as I have.
We will see what they have to say.
Thread
Thread Starter
Forum
Replies
Last Post
pug3984
Touring Models
7
03-08-2011 06:37 AM