Sreamin Eagle heads
Outstanding HDF Member
Joined: Feb 2009
Posts: 2,005
Likes: 53
From: ID Ho
Save the heads for when you do the big bore, if you remove the heads you need to pull the cylinders and replace the base rings so you might as well do it all at once.
As far as CV/Mikuni, while the CV can be fixed to run right the Mikuni IS a BETTER choice, better throttle response, better ridability, more adjustability.
If you do use a CV, DO NOT use a Dynojet or Thunderslide kit, they are a waste of money. Drag has a jet kit that works great, part # DS-195100. Comes with a new needle and emulsion tube and jets, unfortunatly it doesnt come with a 185 mian jet that most mild combos need but you can get that at the dealer part #27185-90, run the 45 pilot and start the mixture screw at 1 7/8 turns out.
As far as CV/Mikuni, while the CV can be fixed to run right the Mikuni IS a BETTER choice, better throttle response, better ridability, more adjustability.
If you do use a CV, DO NOT use a Dynojet or Thunderslide kit, they are a waste of money. Drag has a jet kit that works great, part # DS-195100. Comes with a new needle and emulsion tube and jets, unfortunatly it doesnt come with a 185 mian jet that most mild combos need but you can get that at the dealer part #27185-90, run the 45 pilot and start the mixture screw at 1 7/8 turns out.
Thread
Thread Starter
Forum
Replies
Last Post
Baja555
Want To Buy Motorcycles/Parts/Accessories
1
Mar 4, 2018 07:53 AM
cbaker1@farmersagent.com
Engine Mechanical Topics
18
Nov 1, 2016 09:06 PM
