09 Ultra License Plate Relocation ?
#12
#14
Get the chrome cover for the lense if you do not want to buy a new lense. It covers the old license light. I used a old plate mount I had in the garage from Kuryakin. Had a led light above. Drilled into the light bar from behind and used a HD rubber snubber under the plate to keep from hiting the fender like on the RG. Easy to wire into the tail light. The power is there on the board when you take off the lense.
#16
#17
Terry
#18
#19
I have a 2009 and moved the plate down the tail light using the ultra model turn signal bar wich is shorter and has white leds to light the plate. now I have to cover the 3 ugly holes in the rear fender. any ideas? I dont want to re paint the rear fender....
btw with the ultra turn signal bar you have light on the plate so the best and cheapest way to make the tail light all red is remove the red plastic cover and paint the inside with red bulb paint. will look like stock and imo is better than the chrome cover because with the chrome cover the tail light looks less bright. this worked to me.
btw with the ultra turn signal bar you have light on the plate so the best and cheapest way to make the tail light all red is remove the red plastic cover and paint the inside with red bulb paint. will look like stock and imo is better than the chrome cover because with the chrome cover the tail light looks less bright. this worked to me.
Last edited by Solitario; 08-10-2010 at 10:50 AM.
#20
Join Date: May 2008
Location: Salt Lake City, UT. Dushore, Pa.
Posts: 1,802
Likes: 0
Received 2 Likes
on
2 Posts