Nice scooter jswerve, I have the citrus. Most are saying +2 or +4 but my parts guy said we need to know length of stock housing first before we order, if i knew that we could order clutch cable now. we looked in tech manuel and it didn't give length.
Nice scooter jswerve, I have the citrus. Most are saying +2 or +4 but my parts guy said we need to know length of stock housing first before we order, if i knew that we could order clutch cable now. we looked in tech manuel and it didn't give length.
I had plenty of slack to use I just installed +2 sweepers very similar to the 575's and I extended nothing. All I had to do was slightly loosen the banjo fitting on the hydraulic clutch and change the angle of the line to the bars. These bars come back quite a bit I can't imagine why you would need to extend yours. You can see in my picture how much farther back my bars are in relation to my mirrors over stock bars. By clutch cable I am assuming you are referring to your hydraulic clutch line which is just brake line?
i used a +4 some say u can reroute the stock cable and make it work,i wanted to keep it in stock location,also had to flatten out some bends in the stock brake line,did it by hand.
i used a +4 some say u can reroute the stock cable and make it work,i wanted to keep it in stock location,also had to flatten out some bends in the stock brake line,did it by hand.
Big he doesn't have a cable it's a hydraulic clutch. I didn't have to reroute mine there was plenty. Thanks for sharing...