Road King Won't Start
#22
#25
#26
#27
#28
Pulling the injectors really isn't that bad, left torx head is at an odd angle and I stripped it out. Spent 1.5hrs, slowing grinding head off with dremel. Once head was off, both injectors pulled out at the same time. HD makes a tool to remove injectors from ?fuelrail? but I was able to carefully pry out with flathead. I took several pics along the way.
To clean I rigged up a poorboy injector cleaner, (thanks youtube) and tried to clean ea. one. Front injector cleaned and sprayed perfect, Rear injector would just click and failed to spray anything. Assuming it is bad and this is the culprit for engine not firing. (hard to start if only 50% of your injectors are working). I am going to hopefully locate an injector in the morning and should have an update sometime tomorrow.
Any thoughts for my situation up to this point......
I'm attaching a few small pics below, I can post larger if needed.
To clean I rigged up a poorboy injector cleaner, (thanks youtube) and tried to clean ea. one. Front injector cleaned and sprayed perfect, Rear injector would just click and failed to spray anything. Assuming it is bad and this is the culprit for engine not firing. (hard to start if only 50% of your injectors are working). I am going to hopefully locate an injector in the morning and should have an update sometime tomorrow.
Any thoughts for my situation up to this point......
I'm attaching a few small pics below, I can post larger if needed.