Sold!

 

What year of bike were they on?

 

They were on a '99 Standard.
These bars fit at least from '99 models, up to 2010.
They have the TBW notches.
These are the bars on the bike I removed them from.

 

Someone needs these!

 

Would I need to replace any cables, controls etc. or just remove my old bars (2009 Ultra), feed the TBW through the bars and put the old cables/controls on the new bars?

 

You will need a +4" clutch cable, and thats all.. I just did a set. however i would recommend a TBW assy without the green connector and a pin tool to be able to take your connectors apart as the 575's are internally wired. you can do it without the tool b ut it sure makes life a lot easier, and saves ton's of time.

 

If you don't mind me sayin' it looks like the bars kinda make the fairing mirrors pretty much useless? That's to bad too... That is a main consideration of mine too for changing out the stocker bars. Would have to convert to the perch ones...I think..
Nice lookin' ride, what bars did he replace the W1's with?

 

p.m. sent

 

I have the same bars. LOVE them... I don't see how ANYONE can ride with the stock bars ! They hurt my wrists, after a long ride. The bars work fine with the fairing mirrors, you can see over the top of your knuckles, just fine. Good deal on these bars, someone will get a great deal.

 

Cyclesmith's 13"