Harley Davidson Forums
Well aside from jail and a whole plethora of other shit ive been busy with I just havent had time to.work.on it. Anyway this is the washer..
Well aside from jail and a whole plethora of other shit ive been busy with I just havent had time to.work.on it. Anyway this is the washer..
0 2014/09/22 17:54:24
Like this washer that fits perfectly but really have no idea where it goes
Like this washer that fits perfectly but really have no idea where it goes
0 2022/06/19 13:31:21
It was my understanding these go on the inside of the flywheels in between the rods and face of the flywheels. There is a slot there to accommodate them on the outside? So there's a total of 4 required to complete the flywheel assembly? Apolgise for stating what may seem obvious but I aleady had this thing back together once already and the flywheels were binding in this one spot with about 80% free rotation. Took apart again and destroyed the main bearing in the process..
It was my understanding these go on the inside of the flywheels in between the rods and face of the flywheels. There is a slot there to accommodate them on the outside? So there's a total of 4 required to complete the flywheel assembly? Apolgise for stating what may seem obvious but I aleady had this thing back together once already and the flywheels were binding in this one spot with about 80% free rotation. Took apart again and destroyed the main bearing in the process..
0 2022/06/19 21:48:40
This is the bushing I'm referring to. Also realized if I put that washer on the outside face of the forward primary sprocket it would aid in later removal as I could drive bolts through the sprocket and push it off without marring the aluminum surface of the case? It would also possibly provide the right clearance gap for the opposite side main bearing. Might try it and let yall know how it goes.
This is the bushing I'm referring to. Also realized if I put that washer on the outside face of the forward primary sprocket it would aid in later removal as I could drive bolts through the sprocket and push it off without marring the aluminum surface of the case? It would also possibly provide the right clearance gap for the opposite side main bearing. Might try it and let yall know how it goes.
0 2022/06/20 12:10:51
0 2022/06/20 12:32:06
0 2022/06/20 12:33:13
Threads were worn halfway down. Replaced with a new shaft.
Threads were worn halfway down. Replaced with a new shaft.
0 2022/06/20 13:05:41
0 2022/06/20 15:06:46
Can't find anyone to true your flywheels? Me either. Fuck it! Make a stand. Almost done..
Can't find anyone to true your flywheels? Me either. Fuck it! Make a stand. Almost done..
0 2022/07/01 17:44:12
Left side shaft
Left side shaft
0 2022/07/04 10:07:03
Left side %out
Left side %out
0 2022/07/04 10:08:04
Right side
Right side
0 2022/07/04 10:09:26
Right side % out
Right side % out
0 2022/07/04 10:11:15
0 2022/07/04 10:25:20
And here
And here
0 2022/07/04 10:36:11
Also noticed this little tick mark which I hope is in the right place.. imagine it has to be though because this side is keyed but not the shaft that was originally on these flywheeels.
Also noticed this little tick mark which I hope is in the right place.. imagine it has to be though because this side is keyed but not the shaft that was originally on these flywheeels.
0 2022/07/04 10:44:56
0 2022/07/12 18:31:13
 
 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands