Harley Davidson Forums
mrs. bagga's ruckus
mrs. bagga's ruckus
0 2018/05/24 10:01:30
bagga's ruckus
bagga's ruckus
0 2018/05/24 10:03:08
as a matter of fact.....yes, yes i do.
as a matter of fact.....yes, yes i do.
0 2018/06/05 03:07:12
red wing 968 on the left and yes they can be resoled. red wing offers resoling right at the factory in red wing minnesota. the last pair i sent in was about $100 to get the factory rebuild.
red wing 968 on the left and yes they can be resoled. red wing offers resoling right at the factory in red wing minnesota. the last pair i sent in was about $100 to get the factory rebuild.
0 2018/06/14 03:56:05
0 2018/06/19 03:07:54
0 2018/06/19 03:08:54
0 2018/06/19 03:09:46
i like the lights i added. there's actually 6 more than pictured. had to go all LED lights.
i like the lights i added. there's actually 6 more than pictured. had to go all LED lights.
0 2018/07/21 07:05:45
i'm redoing the bullets on the side because i didn't like how they were set up and i don't have any pics of them lit up. this is all i have of the rear lights on.
i'm redoing the bullets on the side because i didn't like how they were set up and i don't have any pics of them lit up. this is all i have of the rear lights on.
0 2018/07/21 07:59:51
0 2018/07/26 06:40:31
0 2018/07/26 06:45:32
0 2018/08/06 05:44:30
this o ring was bought at a tru value or i could have been an ace hardware store. i don't know the size but just take the dip stick into the store and fit it. it's a very thin o ring. i would say it's been working fine for 4 or 5 years now.
this o ring was bought at a tru value or i could have been an ace hardware store. i don't know the size but just take the dip stick into the store and fit it. it's a very thin o ring. i would say it's been working fine for 4 or 5 years now.
0 2018/08/06 05:49:30
0 2018/08/06 05:53:13
it still is cool
it still is cool
0 2018/08/06 10:27:22
0 2018/08/06 10:28:02
0 2018/08/22 04:54:33
0 2018/08/22 04:55:39
the knife with the black handle is the one i lost. it's a gerber 400 and i like how light it is. i had it for a long time and i just wanted to see if i could find it. i made a small sheath that will only work with that knife so the sheath was useless without the knife.
the knife with the black handle is the one i lost. it's a gerber 400 and i like how light it is. i had it for a long time and i just wanted to see if i could find it. i made a small sheath that will only work with that knife so the sheath was useless without the knife.
0 2018/08/31 05:10:31
over 40 lights on the back. most are vintage bullets with glass lenses.
over 40 lights on the back. most are vintage bullets with glass lenses.
0 2018/09/01 14:55:38
i had this yamaha morphous for 6 years and i loved it. 250cc, double overhead cams fuel injected,liquid cooled and 4 valve head. it would do 75 mph and had about 20 HP. i had a suzuki 650 bergman blow past me while on my hog, the rider was doing about 90 mph or more. i laughed out loud when he past me. the only reason i sold the morphous was ,i had 5 bikes and i just didn't have the room for it.
i had this yamaha morphous for 6 years and i loved it. 250cc, double overhead cams fuel injected,liquid cooled and 4 valve head. it would do 75 mph and had about 20 HP. i had a suzuki 650 bergman blow past me while on my hog, the rider was doing about 90 mph or more. i laughed out loud when he past me. the only reason i sold the morphous was ,i had 5 bikes and i just didn't have the room for it.
0 2018/09/15 05:51:31
0 2018/09/21 06:32:07
0 2018/09/21 06:33:08
0 2018/09/25 04:55:34
throwout bearing went out on my 85. there wasn't enough adjustment to get the clutch cable tight enough so i couldn't get the bike into first gear. took up the cable slack with a worm clamp and a piece of wire rode the bike about 50 miles home without using the clutch to up shift or down shift. used the clutch twice, once to get going and once to stop when i got in the driveway.
throwout bearing went out on my 85. there wasn't enough adjustment to get the clutch cable tight enough so i couldn't get the bike into first gear. took up the cable slack with a worm clamp and a piece of wire rode the bike about 50 miles home without using the clutch to up shift or down shift. used the clutch twice, once to get going and once to stop when i got in the driveway.
0 2018/10/06 08:32:43
i drilled a hole in the tab and put a hair pin thru it to hold the lid on if i forget to lock the cover. a piece of leather shoe lace keep the pin from being lost.
i drilled a hole in the tab and put a hair pin thru it to hold the lid on if i forget to lock the cover. a piece of leather shoe lace keep the pin from being lost.
0 2018/10/09 04:14:19
 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands