Front turn signal recolation
Thread Starter
|
Stage IV
Joined: May 2007
Posts: 4
Likes: 0
From: Tarpon Springs, FL
Front turn signal recolation
I recewntly bought a 2007 Dyna Low Rider. I have to admit the turn signals on the handle bars irratates the living s**t out of me. The only thing that looks worse is the relocation kit HD sells.
The only brackets I have found that are decent are the following
Rucker Signal Clamps for 41mm Forks
http://www.jpcycles.com/productgroup...F-29FB6BF0201F
Kuryakyn™ Silver Bullets
http://www.jpcycles.com/productgroup...C-BA2ECBD5B1B2
I've seen posts on the Kurakyn mounts, but has anyone installed the Rucker mounts? Any pictures of how they look installed? Any others out there I should consider?
The only brackets I have found that are decent are the following
Rucker Signal Clamps for 41mm Forks
http://www.jpcycles.com/productgroup...F-29FB6BF0201F
Kuryakyn™ Silver Bullets
http://www.jpcycles.com/productgroup...C-BA2ECBD5B1B2
I've seen posts on the Kurakyn mounts, but has anyone installed the Rucker mounts? Any pictures of how they look installed? Any others out there I should consider?
Road Captain
Joined: Dec 2006
Posts: 516
Likes: 29
From: Fenton, MO
RE: Front turn signal recolation
I put the Kuryakyn large Silver Bullets with 35 watt halogens on my bike as running lights. I used the Kuryakyn 2 piece 49mm clamps to mount them. They mount verry close to the fork tubes and realy look great.
The mounts were $49 and are easy to install. You have to buy the Sillver Bullits that mount with the 5/16 inch bolt not the ones that use the 3/8 hollow bolt.
The mounts were $49 and are easy to install. You have to buy the Sillver Bullits that mount with the 5/16 inch bolt not the ones that use the 3/8 hollow bolt.
Road Master
Joined: Jul 2005
Posts: 916
Likes: 3
From: Mauldin, SC
RE: Front turn signal recolation
Those 41mm Rucker clamps won't work on your 07, it has 49mm forks.
I used the 49mm Kuryakyn clamps with the stock turn signals. The clamps come with 5/16-18 X 3/4" button head screws that you'll have to replace with 5/16-24 button head screws if you're going to use the stock lights. Thelight won't sit flat on the clamp eitherif you don't use a spacer or jam nuts on the screw. The flat boss on the light is smaller than the boss on the clamp and the curved part of the light will hit the clamp before the flat boss does. I used a couple thin jam nutswhich also allowadjusting the angle of the lights without taking the clamps off the fork tube.
I used the 49mm Kuryakyn clamps with the stock turn signals. The clamps come with 5/16-18 X 3/4" button head screws that you'll have to replace with 5/16-24 button head screws if you're going to use the stock lights. Thelight won't sit flat on the clamp eitherif you don't use a spacer or jam nuts on the screw. The flat boss on the light is smaller than the boss on the clamp and the curved part of the light will hit the clamp before the flat boss does. I used a couple thin jam nutswhich also allowadjusting the angle of the lights without taking the clamps off the fork tube.
Tourer
Joined: Jul 2006
Posts: 380
Likes: 3
From:
RE: Front turn signal recolation
Thread Starter
|
Stage IV
Joined: May 2007
Posts: 4
Likes: 0
From: Tarpon Springs, FL
RE: Front turn signal recolation
Yeah murphdog, I should have seen that. I know they are 49mm forks. Just frustrated with the lack of options out there.
Trending Topics
Road Captain
Joined: Dec 2006
Posts: 516
Likes: 29
From: Fenton, MO
RE: Front turn signal recolation
Stevieg,
Sorry for the delay. I was out of town for a while. I will take a shot or two tonight and try to post them.
Clear33765,
I agree. The 06, 07 Dyna front end is like a red headed step child. No one makes S#*$ for them.
Jim
Sorry for the delay. I was out of town for a while. I will take a shot or two tonight and try to post them.
Clear33765,
I agree. The 06, 07 Dyna front end is like a red headed step child. No one makes S#*$ for them.
Jim
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Jason Momoa Is Turning Classic Harleys Into PHEVs
Verdad Gallardo
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Road Captain
Joined: Dec 2006
Posts: 516
Likes: 29
From: Fenton, MO
RE: Front turn signal recolation
Hereare a couple of shots of my driving lights.
Jim
[IMG]local://upfiles/21893/2A932B4979E844F3B352ECBE291BF8F5.jpg[/IMG]
[IMG]local://upfiles/21893/780098BE54434216BBCACEFC3FF85F8A.jpg[/IMG]
Jim
[IMG]local://upfiles/21893/2A932B4979E844F3B352ECBE291BF8F5.jpg[/IMG]
[IMG]local://upfiles/21893/780098BE54434216BBCACEFC3FF85F8A.jpg[/IMG]
