rear brake fluid reisvoir on a street bob
#1
#2
RE: rear brake fluid reisvoir on a street bob
Pull the battery box cover and you get a little straighter angle on the screws. \\; Use a good screwdriver of the correct size, and take care not to strip them. \\; Unscrew both screws until they are loose of the resevoir, but still through the cover. \\; Reach through from the bottom and take the cover off. \\; I use a long funnel with a couple of bends in it. \\; A short funnel with a clean, clear hose would work well also. \\; Try no to contaiminate the fluid, to include introducing water from the funnel, and remember that that fluid will marr or even remove some paints. \\; Look at the gasket when you take the cover off. \\; It sticks into the resevoir, and will displace some fluid, so you don't need to fill it to the brim. \\; Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
SixDD
Dyna Glide Models
16
01-08-2019 04:22 PM
MNPGRider
Frame/Suspension/Front End/Brakes
4
10-23-2015 04:39 AM
notimeleft
Softail Models
3
08-26-2013 12:38 PM