200mm conversion kit

Reply Subscribe

Thread Tools

Search this Thread

Sep 2, 2017 | 09:02 PM

#11

gartec81

Grand HDF Member

Joined: May 2010

Posts: 4,356

Likes: 887

From: san diego

My bad Look for Softail wheel 2008+. 17x6. Forget duece. Look at Fatboy or Softail standard.

Sep 2, 2017 | 10:02 PM

#12

jmeiers

Road Warrior

Joined: Nov 2010

Posts: 1,251

Likes: 30

From: Ashburn, VA

200 under lowered stock fender and slammed on air ride. No rub! Stock spacers and pulley. Just beat the inner fender brackets flat and ditch the rear signals (or relocate).

Sep 3, 2017 | 11:41 AM

#13

Swchief1@gmail.com

Thread Starter

6th Gear

Joined: Aug 2017

Posts: 14

Likes: 1

From: Middleburg, Fl

Awesome. Thank you

Quote:

Originally Posted by gartec81

Use any rim that's a 5.5" rear or 6". Fat Bob rear wheel, Softail duece wheel. Or get one from a aftermarket vendor. Make sure all wires are super tight under your fender or relocate them along the fender struts. And then put your 200mm under there.

Pretty straight forward

Sep 3, 2017 | 11:43 AM

#14

cggorman

Extreme HDF Member

Joined: Jun 2014

Posts: 11,448

Likes: 2,299

From: NW Ohio

Before you leap, Check out you potential tire choices. The recommended rim widths vary by make/model/size. Would suck to have a rim that you can't fit to your desired tire.

Sep 3, 2017 | 11:43 AM

#15

Swchief1@gmail.com

Thread Starter

6th Gear

Joined: Aug 2017

Posts: 14

Likes: 1

From: Middleburg, Fl

Looks amazing, good looking ride

Quote:

Originally Posted by jmeiers

200 under lowered stock fender and slammed on air ride. No rub! Stock spacers and pulley. Just beat the inner fender brackets flat and ditch the rear signals (or relocate).

Sep 3, 2017 | 12:39 PM

#16

multihdrdr

Club Member

Joined: Oct 2011

Posts: 11,176

Likes: 2,488

From: Nor Cal

Also FWIW...those 17x6 Softail wheels have a wider hub than Dynas...approx .450-.500" wider.

(Photo Below is showing Laced Spoke Hubs, but same thing)

Sep 3, 2017 | 04:46 PM

#17

cthagreekgod

Tourer

Joined: Apr 2010

Posts: 287

Likes: 31

If you really want to do this, I've got a 6" outer rim for sale in the classifieds here. Basically all you will need. It just laces to the stock hub with the stock spokes.