Heel Toe Shifter
Cruiser
Joined: Aug 2007
Posts: 162
Likes: 0
From:
RE: Heel Toe Shifter
That pn is designed to be used with FXDPfloorboards, which they no longer make. If you can find a set, expect to pay a ton. The last set I saw on ebay went for over $800. They are very scarce.
Cruiser
Joined: Oct 2005
Posts: 166
Likes: 0
From: New Hampshire
RE: Heel Toe Shifter
You're in luck Cuda. Check out Dewey's Custom Pegs at deweyspegs dot com. I purchased one for my own 05 FXDI. I can't live without it now. I also ordered that one outta the H-D catalog firstbut it was ugly as all get out since as stated above it isreally made for use with floorboards.
2nd Gear
Joined: Jan 2006
Posts: 6
Likes: 0
From: Last 20+ southeast Michigan
toe-heel shifter
Had to replace stocker (FXDP '04) after it pulled teeth. Purchased the unit for FLHT, split arm and it works just fine. The added plus was the ability to adjust height as opposed stock one piece cast used on FXDP stock.
Advanced
Joined: Jul 2009
Posts: 61
Likes: 0
From: Tacoma, WA
I had the stock FXDP levers but didn't like how close they were. No room for my fat foot. I picked up an aluminum one piece thinking I could make it work with floorboards. No luck and not much more "spread" than the stock levers. Probably the perfect thing with pegs.
A link to the Instruction Sheet is in my database:
https://www.hdforums.com/forum/5575441-post2.html
FXD2003Rider
Trending Topics
Road Warrior
Joined: May 2008
Posts: 1,955
Likes: 6
From: Little Rock
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Stage III
Joined: Apr 2010
Posts: 3
Likes: 0
I got exactly the problem you describe.
I'm trying to make it a two piece shifter, so I can position each lever exactly where I want for easier shifting.
I've got from eBay a heel shifter of the correct length = 9 inch (23 cm). Measured from the centre of the gear shaft to the centre of the peg.
The front (toe) lever is 4 1/3 inch [4.33"] (11 cm). It's a lot shorter than all the other shifter levers I've tried.
Does anyone know of one of the correct length?
The Sportster shifter looks quite short. Would this do?
I see from FXD2003Rider's post that the V-Twin Mfg FXD Floorboard Kit (VT No. 27-0920) has a two piece shifter. What length is the toe shifter?
And if it's the correct length, what is the part number?
I've got a FXDX 2003 with a Dyna floorboard kit with an all-in-one heel & toe shifter (33756-01).
I got exactly the problem you describe.
I'm trying to make it a two piece shifter, so I can position each lever exactly where I want for easier shifting.
I've got from eBay a heel shifter of the correct length = 9 inch (23 cm). Measured from the centre of the gear shaft to the centre of the peg.
The front (toe) lever is 4 1/3 inch [4.33"] (11 cm). It's a lot shorter than all the other shifter levers I've tried.
Does anyone know of one of the correct length?
The Sportster shifter looks quite short. Would this do?
I see from FXD2003Rider's post that the V-Twin Mfg FXD Floorboard Kit (VT No. 27-0920) has a two piece shifter. What length is the toe shifter?
And if it's the correct length, what is the part number?
I got exactly the problem you describe.
I'm trying to make it a two piece shifter, so I can position each lever exactly where I want for easier shifting.
I've got from eBay a heel shifter of the correct length = 9 inch (23 cm). Measured from the centre of the gear shaft to the centre of the peg.
The front (toe) lever is 4 1/3 inch [4.33"] (11 cm). It's a lot shorter than all the other shifter levers I've tried.
Does anyone know of one of the correct length?
The Sportster shifter looks quite short. Would this do?
I see from FXD2003Rider's post that the V-Twin Mfg FXD Floorboard Kit (VT No. 27-0920) has a two piece shifter. What length is the toe shifter?
And if it's the correct length, what is the part number?
Both kits have the same p/n.....
Mounting instruction sais: "for use on 1996-09 FXD models"....
Kit from online catalog says: "1996-up FXD Floorboard Kit includes a 2 piece heel-toe adjustable shift lever"....
Kit in mounting instruction shows a one-piece heel-toe shifter lever....
Kit from catalog shows a shifter lever bracket similar to the one used in the OEM kit (will not mount on 06 Dyna's and later)....
Kit in mounting instruction shows an integrated shifter lever/front floorboard mounting bracket which can be used on all models....
To be shure if the two piece heel-toe shifter is still available and fits your demands, I'd say you'd contact V-Twin Mfg and ask them.
FXD2003Rider
