EFI remapping info needed
Thread Starter
|
Intermediate
Joined: Apr 2006
Posts: 45
Likes: 0
EFI remapping info needed
This mapping question for EFI is giving me a headache. I want to put a set of D&D slipons on my 2006 Dyna Super Glide. D&D says no mapping is is needed if I keep a stock air filter on. Also it will run better with a high flow filter no mapping needed. This goes against all the info I have been reading lately that you have to remap if you change any part of your stock pipes or A/C.
Can anyone tell me if remapping is needed for slipons D&D or any brand.
Thanks in advance for any help
Can anyone tell me if remapping is needed for slipons D&D or any brand.
Thanks in advance for any help
Road Master
Joined: Feb 2006
Posts: 1,072
Likes: 0
From: I been around
RE: EFI remapping info needed
ORIGINAL: RWP
You can most likely get by with pipes only. If you change pipes and add a high flow air cleaner, you will need to be able to adjust the ecu.
Rick
You can most likely get by with pipes only. If you change pipes and add a high flow air cleaner, you will need to be able to adjust the ecu.
Rick
Thread
Thread Starter
Forum
Replies
Last Post
ralphmalph
Sportster Models
4
Aug 1, 2006 11:24 PM
