So I got my new wheels today. I am swapping out the stock spoke wheels on a 07 Street Bob and going to a 18x5.5 rear and bumping up to a 200mm tire. Let me preface my wrench skills as I generally firgure things out by trial and error and reading this forum..My issue is my rear wheel has a flange on the right for the brake rotor but nothing on the other side for my pulley. Am I missing something here or did the guy simply not weld on a flange on the other side for my pulley to mount to? I 'll attach some photos..Help would be huge....thanks

 

I really like that wheel. Looks heavy though. Are you going to powdercoat it? A 200 would be interesting on there.

 

gonna have it done in either flat black or wrinkle and run a metz 200, that is if i can get the rotor issue figured out..

 

I was under the impression that only a 180 would fit on the 07 SB fender? maybe not? that's what i've gathered from this forum at least... hmmm.. let me know how it works out.
J.

 

Looks like a single flange wheel to me. Which means you mount the pulley and rotor on the same side, a rather expensive setup. Something like this. I don't think I've ever seen one on a Dyna before.
http://www.jpcycles.com/search/produ...=0&results=100

 

nice wheel, looks like the invader wheels from the 60s and 70s

 

Why don't you contact the wheel's manufacturer? Or whoever you bought it from. These are the types of details that should be understood before buying accessory items.