new bars and risers
new bars and risers
ya i know, it is late in the winter (spring) to be working on my bike now, but we had a busy winter!!! so now i get to work on some of our stuff... doing the motor, and just got my new risers in from Loner. I love that he does our shops machine work, by far is the best CNC i have ever had the honor of working with...
alot more mods to come in the next few weeks!
told him what i wanted and he ran with it, made me the coolest risers i have ever seen!
bear in mind that these willl be quick release. i am going to pre wire them so i can swap from the apes to these by just unpluging the wires, pulling the controls and bolting on the new bars, a 5 min job! be awesome
but here are my new bars... stil need custom coating and some polishing but you get the idea!
the rise is 12.5, plus the 1.5 on the bar, bringin me right around 14 inches, they are cored for internal wiring down the risers, have a support plate that goes across the top of the bar to keep them from moving and twisting, and have custom dice CNC caps for the risers... just awesome! Picked up the bars last night and did a quick mock up
everything will be gloss black, (controls, bars, risers, and the dots on the dice, the caps will be polished to a high gloss, and textrued powder will be used on the grips.
alot more mods to come in the next few weeks!
told him what i wanted and he ran with it, made me the coolest risers i have ever seen!
bear in mind that these willl be quick release. i am going to pre wire them so i can swap from the apes to these by just unpluging the wires, pulling the controls and bolting on the new bars, a 5 min job! be awesome
but here are my new bars... stil need custom coating and some polishing but you get the idea!
the rise is 12.5, plus the 1.5 on the bar, bringin me right around 14 inches, they are cored for internal wiring down the risers, have a support plate that goes across the top of the bar to keep them from moving and twisting, and have custom dice CNC caps for the risers... just awesome! Picked up the bars last night and did a quick mock up
everything will be gloss black, (controls, bars, risers, and the dots on the dice, the caps will be polished to a high gloss, and textrued powder will be used on the grips.
Road Master
Joined: Feb 2010
Posts: 804
Likes: 1
From: 415
Looks sick. I have been throwing some new risers and drag bar on myself over the last few days. Need to get the tank back on. No doubt your final setup will be as clean as all the other stuff you do.
Dan
Dan
Trending Topics
Tourer
Joined: Aug 2008
Posts: 289
Likes: 7
From: FRANCE
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
The Best and Worst Harley-Davidson Moves of 2025
Verdad Gallardo
i wanted something a bit more in my face and solid than the apes for after the motor is done, so I can really push the bike when i am trying to keep up with chad and his brother, hell and my brother! so this will give me better control when i am ripping hard. the bars are actaully stock V rod bars, i will have to check on the width when i get home. i really like the T bar style but had to do something a bit diff than SOA, having someone like Loner in my corner really helps!