Few Changes
Thread Starter
|
Stellar HDF Member
Joined: Mar 2006
Posts: 2,622
Likes: 7
From: Gulf Coast
Few Changes
I decided to go back to a one up configuration for a while.
From this:
To this:
The Motherwell rack is one made for a Roadking which I modified to work with the Corbin seat since one is not currently produced to work with the Corbin solo on a dyna.
From this:
To this:
The Motherwell rack is one made for a Roadking which I modified to work with the Corbin seat since one is not currently produced to work with the Corbin solo on a dyna.
Thread Starter
|
Stellar HDF Member
Joined: Mar 2006
Posts: 2,622
Likes: 7
From: Gulf Coast
RE: Few Changes
I changed out the std se intake for the chrome one,added k&n filter and switched from the round nostalgic filter to open element with a chrome cover from harley.
Also replaced most of the bolts on the engin and trans with chrome allen head bolts.
Also replaced most of the bolts on the engin and trans with chrome allen head bolts.
Thread Starter
|
Stellar HDF Member
Joined: Mar 2006
Posts: 2,622
Likes: 7
From: Gulf Coast
RE: Few Changes
I'm pretty much finished with mods to the bike. Still planning to add two inch risers and either two or four over tubes to complete the look I want. Time to quit spending for a while,it's amazing how quickly you can spend several hundred dollars every month and I;m pretty conservative,buy used and off ebay when I can.
Now it's time to go ridin',think I'll head for Gulf Shores,see my kids and grand kids and cruise the beach for a while,nice two or three hour ride.
You all be safe.
Tom
Now it's time to go ridin',think I'll head for Gulf Shores,see my kids and grand kids and cruise the beach for a while,nice two or three hour ride.
You all be safe.
Tom
Cruiser
Joined: Jul 2006
Posts: 206
Likes: 0
From:
RE: Few Changes
Tommay, I have been waiting for Motherwell to make a rack that fits the Corbin Classic Solo on the Street Bob. What did you have to do to the Road King rack to make it fit, and what is the motherwell part number? The rack looks good on your bike.
Elite HDF Member
Joined: Feb 2006
Posts: 4,051
Likes: 8
From: Detroit Michigan
Trending Topics
Thread Starter
|
Stellar HDF Member
Joined: Mar 2006
Posts: 2,622
Likes: 7
From: Gulf Coast
RE: Few Changes
ORIGINAL: mvlow
Tommay, I have been waiting for Motherwell to make a rack that fits the Corbin Classic Solo on the Street Bob. What did you have to do to the Road King rack to make it fit, and what is the motherwell part number? The rack looks good on your bike.
Tommay, I have been waiting for Motherwell to make a rack that fits the Corbin Classic Solo on the Street Bob. What did you have to do to the Road King rack to make it fit, and what is the motherwell part number? The rack looks good on your bike.
This should help.
https://www.hdforums.com/m_651760/tm.htm
Good Luck
Tom
Thread Starter
|
Stellar HDF Member
Joined: Mar 2006
Posts: 2,622
Likes: 7
From: Gulf Coast
RE: Few Changes
ORIGINAL: tdshepard
TOMMAY, where did you buy your laydown tail light lens??
TOMMAY, where did you buy your laydown tail light lens??
http://cgi.ebay.com/ebaymotors/Laydo...28671055QQrdZ1
good Luck
Tom
Thread
Thread Starter
Forum
Replies
Last Post
mreed
Sportster Models
748
Mar 30, 2017 12:08 PM