Throttle by wire Hard wiring help On 16 FXLDS
Thread Starter
|
Stage II
Joined: Feb 2019
Posts: 2
Likes: 0
From: Oklahoma
Throttle by wire Hard wiring help On 16 FXLDS
I need help hard wiring this bc the idiot before me cut all the plugs off. Everything else has been very easy and color coded but this has 2 reds 2 whites and 2 blacks all in the same plug. How in the world can I distinguish which goes where? Can anyone help me in doing this? Please help me out. It’s on a 16 dyna low rider s
Last edited by Jlohojo7; Feb 12, 2019 at 12:20 AM.
Thread Starter
|
Stage II
Joined: Feb 2019
Posts: 2
Likes: 0
From: Oklahoma
Even if that shows me where they go to how am I suppose to determine which red is which which black is which and which white is which. Why didn’t they just make them different colors or striped ? Thoughts for determining what’s what? Or does it even matter as long as the colors are together?
Last edited by Jlohojo7; Feb 11, 2019 at 11:34 PM.
Outstanding HDF Member
Joined: Feb 2015
Posts: 2,414
Likes: 433
From: Arkansas
Go here https://serviceinfo.harley-davidson.com/sip/index and look up your bike, you can get the wire diagrams and in the wire diagrams it will give you both ends of each wire so you can see what pin on the other end it goes to to id what pin it would go to in the plug that you are trying to fix. For example, P1 red pin1 to P5 pin 3 and then P1 red pin 5 to P7 pin 7. I would be easy to differenciate between by just following the wiring diagram and using a multi-meter to check for continuity in the wires.
Thread
Thread Starter
Forum
Replies
Last Post
sixshooter
2014-2024 Touring Models
4
Jan 23, 2015 05:34 AM