Will this damage my bike?
#1
Will this damage my bike?
Just installed a new Dragula 2:1 on my '14 SGS. My chosen tuner is about a 3 hour drive away. He said I should be fine riding the bike to him as long as I don't install the high flow A/C yet, and just bring it with me to be installed at his shop when I arrive. I've read some threads about running bikes too lean and doing damage to the engine. I would assume that, with the stock A/C still installed and the only change being how exhaust leaves the engine, the engine itself should remain relatively unchanged. Should I be ok?
#3
#4
I've run the bike for a total of about ten minutes and it sounds great. Only one decel pop after revving and it was minor. Yes, it is Doc, but I didn't want to air him out in case someone comes on here trying to bash without knowing what they're talking about. He tuned my 2010 SG and it ran like a dream. Spoke to its new owner the other day and after three years of owning it he still raves about the performance. Very glad to be close enough to have him tune it.
#5
That Rush Wrath is not going to harm you prior to getting it tuned.
Scott
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#6
#7