Hi I have a 1988 FXSTC and am looking for the spacer washers that go between the swingarm and the frame. I was wondering if anyone had the sizes and I could make some up.
Thanks


43283-8643283-8643 jnjjjj283-86

 

This is what i found after a quick search . . .

https://www.ebay.com/itm/18594421858...9-51383311b510

 

https://i.ebayimg.com/images/g/nbsAA...W5/s-l1600.jpg



step washers 20 (one on each side inside plastic protector cups 19),




Center through channel ID, .645"
Total thickness, .188"
Thickness of larger step edge .075.

Od at larger step edge, 1.360"
OD as thinner edge 1.255"

If it not that washer, but something else from the above FX diagram, then post what number.

 

Thanks for the reply but they are the wrong ones as mine is a softail.

 

You said you wanted to make your own but I don't have one to measure.

The part number you're looking for is 43283-86 and they are available on ebay as aftermarket or NOS. Not all sellers will ship overseas, so check the shipping details carefully.

 

Its item number 32 im after. Thanks

 

https://customcruisers.com/contents/...est_83-25.html