EVO Cams
Thread Starter
|
Cruiser
Joined: Jan 2006
Posts: 137
Likes: 1
From:
EVO Cams
Was wondering if anyone here knows what the best Woods Cam is to run in an EVO Bagger? I am currently running the SE EFI Stage 2 kit in my bagger and was wondering if anyone is running an Woods cams in their EVO application? I plan on adding V&H True Duals and having the heads milled a little bit to raise the compression some (not much). I’m happy with what I have, but was thinking about the possibilities of tinkering or tweaking out a little more power during the winter down time..TIA
Thread Starter
|
Cruiser
Joined: Jan 2006
Posts: 137
Likes: 1
From:
RE: EVO Cams
Really, Booby Wood? He's been around for some time. Not to worry. I've been researching for awhile, I'll keep looking..
http://www.woodcarbs.com/
http://www.woodcarbs.com/
Banned
Joined: Feb 2006
Posts: 20,836
Likes: 7
RE: EVO Cams
ORIGINAL: 98kingflh
Really, Booby Wood? He's been around for some time. Not to worry. I've been researching for awhile, I'll keep looking..
http://www.woodcarbs.com/
Really, Booby Wood? He's been around for some time. Not to worry. I've been researching for awhile, I'll keep looking..
http://www.woodcarbs.com/
The King Carb,looks very interesting.
1st Gear
Joined: Nov 2006
Posts: 5
Likes: 0
From: South FL, USA, Earth
RE: EVO Cams
Re; Woods
I have his W-6 cam in my bike. LOVE IT! It was recommended by Bob. I purchased it some time back. Way back then, Bob answered his own phone. The 96 Nostalgia, is no light wieght, but not as heavy as any of the 'Glides. The W-6 is comparable to the EV-27, but it kicks in about 500 RPM sooner and stays in about 500 RPM longer.
I had already gutted the muffs, installed the DYNA 2000 (SF), the KingCarb, Magnacore ignition wires, all syn fluids, and cam when i took her in for a new back tire. I was in the parking lot when the wrench came back from a test ride. I asked him how she ran. He said that she ran strong, even for a bike with ported heads. When I told him the heads were stock, he said "no way".
Bob Woods sells good stuff.
I have his W-6 cam in my bike. LOVE IT! It was recommended by Bob. I purchased it some time back. Way back then, Bob answered his own phone. The 96 Nostalgia, is no light wieght, but not as heavy as any of the 'Glides. The W-6 is comparable to the EV-27, but it kicks in about 500 RPM sooner and stays in about 500 RPM longer.
I had already gutted the muffs, installed the DYNA 2000 (SF), the KingCarb, Magnacore ignition wires, all syn fluids, and cam when i took her in for a new back tire. I was in the parking lot when the wrench came back from a test ride. I asked him how she ran. He said that she ran strong, even for a bike with ported heads. When I told him the heads were stock, he said "no way".
Bob Woods sells good stuff.
Thread
Thread Starter
Forum
Replies
Last Post
buddha7974
Exhaust System Topics
10
Nov 21, 2012 11:46 PM
