Used tool kit with tank cover, all parts present and in like new condition.
Part# CYCLESETPK
$225 shipped lower 48
Snap-On's Description:
This 33 pc. kit services most American manufactured motorcycles. From battery service, cable and clutch adjustments, to gas tank and seat removal, this set covers roadside maintenance and emergency repairs. Set is conveniently organized and stored in a gas tank shape bag measuring 10" long, 5 1/2" wide, and 2 1/4" high and is small enough to fit almost anywhere.

Set Components and Applications
CYCLESET includes:

T72 Ratchet (1/4" drive)
TM5 Sliding T-Handle (1/4" drive) – used with 1/4" drive sockets
TMBS8A Magnetic Bit Holder (1/4" drive)
TMXK4 4" Long Knurled Extension (1/4" drive)
TA3 1/4" drive Female to 3/8" drive Male Adaptor
S9706KRA 5/8" Spark Plug Socket (3/8" drive)
S9704KA 13/16" Spark Plug Socket (3/8" drive)
1/4" Drive FLANK DRIVE® 6 Point Sockets:
•TM8 6 Point Socket (1/4")
•TM10 6 Point Socket (5/16")
•TM12 6 Point Socket (3/8") – cable adjustment
•TM14 6 Point Socket (7/16") – saddlebag adjustment
•TM16 6 Point Socket )1/2") – clutch cable, mirrors and pinch bolts
•TM18 6 Point Socket (9/16") – belt adjustment and clutch cable
SDM3708 Hex Bit (1/8") – Rear brake master cylinder
SDM3710 Hex Bit (5/32") – handle bar controls)
SDM3712 Hex Bit (3/16") – miscellaneous covers
SDM3714 Hex Bit (7/32") – clutch pressure plate adjustment
SDM3716 Hex Bit (1/4")
SDMA4720 Hex Bit (5/16") – air cleaner cover and filter, rear passenger foot plate, brake caliper remover
SDMA4724 Hex Bit (3/8") – for transmission dip stick
SDMTA45 TORX® Bit (T45) – rear rotors
SDMTA40 TORX® Bit (T40) – gas tank removal, primary drain plug removal and battery hold down
SDMT420 TORX® Bit (T20)
SDMT427 TORX® Bit – outer fairing, ignition switch cap and housing, control lever fasteners, derby cover housing and chain cover inspection
SDMT425 TORX® Bit (T25) – used on switches plus clutch and derby covers
SDMT430 TORX® Bit (T30) – used on switches plus clutch and derby covers
SDMT415 TORX® Bit (T15) – handle bars
SDM522A Phillips® Bit (#2) – mirrors, master cylinder, ignition switch button, seat removal, turn signal light lens and head light replacement
SDM516A Small Slotted Bit – mirrors, master cylinder, ignition switch button, seat removal, turn signal light lens and head light replacement
SDM519A Large Slotted Bit – miscellaneous adjustments
FB361A Spark Plug Gap Tool – fractional sizes .020" to .1")
OEXM10B Battery Cable Wrench (10mm)
GAJ8A Adjustable Wrench (8") – various applications
PAK562430 Kit Bag – conveniently organized and stored in a gas tank shape bag measuring 10" long, 5 1/2" wide, and 2 1/4" high and is small enough to fit almost anywhere

 

Bump...............

 

I know it's a long shot but do you still have this?

 

Sorry, sold on e-bay three weeks ago.

 

Dang! I guess I should have been paying better attention. I planned on bidding on the one on eBay a few weeks ago. I would almost guaranty that it was yours I was watching. Ehh maybe next time.