Looking really good.

Bry - this is the best profile I have of the right side, just yet ... I just completed installation of the tank yesterday evening and only photos I have are what I've posted up so far ... to me this photo is not in the best focus, but composition is pretty good ...

Ooooooooooooooooooooohhhhhhhhh!!!!!!!!!!!!

The photo is fine man the lines are great that's all I wanted to see. Like the color a lot, the black accents are killer

I think this photo turned out pretty good ... after installing the bags ....

OK, lets start talking about dual exhaust. Surfor Chop, I saw you talking on that Roadking thread, but that thread will probably die. This is something I really want to do. It may take me a while to find all the parts, but I would love to see any more pictures or how to-s.

Well I got the Memphis Shades Black anodized trigger lock mounting kit in today and I installed my Dyna model Batwing fairing and windshield on the bike. I'm still in the process of getting some black denim paint and denim clear coat to paint it and the touring hard saddlebags that I bought. I got the black fairing lowers from Memphis Shades also, but won't put them on until the fairing is painted.

I'll have to relocate my turn signals because the fairing covers them up, but I already had relocating brackets. I'll just have to dig into the wiring in the stock bars and move them.

Will post pictures of it once it is ready to wheel out of the shop.

I got the front turn signals relocated down on the fork tubes right above the lower triple tree.

In order to paint ABS plastic such as the hard saddlebags, does a person need to etch the plastic with some kind of chemical stuff so that the paint will adhere to it and not flake or peel off? Also what about the MS black batwing fairing - can you just primer and paint it or does it need the same treatment to get the paint to stick to it?

Alright, I'm at a snafu on my touring hard saddlebags. I still have my easy brackets to use to mount the bags to the bike, but even with my rear turn signal relocation brackets, they will not fit there without moving the rear turn signals. Any ideas anybody can give me so that I can mount the hard bags?

Thanks,

Doug

I'm a little behind on your mods, got any pictures?