i dont need help i just thought i would post for anyone searching and maybe a future heads up for someone....long story short a weak spark situation went to a no spark after changing condensor.i found out the wek spark was due to points needed cleaning and the no spark occurred aftre i replaced the condensor and placed the connector upside down instead of right side up as it was easier.......but it caused it to stick out 1-2 millimeters and grounding outto the points cover that i was only putting back on ever so often while working on it.i left out some whys and hows and theorys etc.....but i confess it drove me crazy for a little while.-----hope this helps someone somewhere out there.