Manual Oil Pressure Gauge For M8's
#21
To speak with a Harley-Davidson customer care representative please call 1-800-258-2464 or (414) 343-4056.
Representatives are available Monday through Friday 8:00 a.m. - 8:00 p.m. Central Standard Time (CST).
#22
#23
#24
#26
Been looking for fitting and am finding none. Problem is finding a tee that has the male and female ends with a take off on the side. All I'm finding have the required male end to screw into the motor, but the 2 remaining ends are both a flare. Possibly the easiest solution is an extension and just drill and tap the side for an 1/8npt for a gauge. Plus it gets away from the motor but getting the orientation right will vary from motor to motor. Without a bunch of cobbled up fittings, going to be a challenge
#27
#28
They can get you pretty much anything it is what they do. There is nothing strange or odd about a Boss fitting been around for years they show adapters on that page that you can put in and convert to pipe or what ever you need. Boss fitting seal and work much better major reason they are used in a lot of HYD systems.
#29
My money is on that answer. When the average non mechanical rider pulled up to a stop sign and they noticed that oil pressure dropped from 40 psi to 5 psi, they started bugging the dealers and calling tech support. In reality it was working like it was supposed to work. I, for one, want the psi reading back to the infotainment window...not this OK crap.
The following users liked this post:
Dave61 (02-08-2020)
#30