Jackpot header
#41
11-15-2017, 12:39 PM
Seasoned HDF Member
It's not about exhuast, it's about head flow. The 4 valve heads are designed to to "eliminate loud exhaust". I have a full header system (catless) and 4-1/2" cans. yes, it's better than stock but it's not the thump of a TC.
Small lobe cams combined with hi-flowing heads = EPA approved noise levels.
You can get the sound you want but it won't be from a SE stage 4. I have enough of these bikes around me everyday with different combinations to know that just a header and slip-ons is not going to give you the thump everyone desires.
I went as far as to remove my baffles from my slip-ons and posted a vid here, Others followed suit. It's much better than before but still not to my liking.
I'm about to add a camshaft next week, so Ill post up a vid of the before and after sound.
Small lobe cams combined with hi-flowing heads = EPA approved noise levels.
You can get the sound you want but it won't be from a SE stage 4. I have enough of these bikes around me everyday with different combinations to know that just a header and slip-ons is not going to give you the thump everyone desires.
I went as far as to remove my baffles from my slip-ons and posted a vid here, Others followed suit. It's much better than before but still not to my liking.
I'm about to add a camshaft next week, so Ill post up a vid of the before and after sound.
#42
11-15-2017, 02:35 PM
Platinum Sponsor
The exhaust is exactly the same, however we are now offering it with HTC ceramic coating. The exhaust system surface temps are cooler and the finish is beautiful.
__________________
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
#43
11-15-2017, 02:37 PM
Platinum Sponsor
The following users liked this post:
GPHDXLC (11-15-2017)
#44
11-15-2017, 02:40 PM
Seasoned HDF Member
that ceramic coating sounds like the way to go..our Service Manager shared some experiences in having it done with us and swears by it
#45
11-15-2017, 02:54 PM
Seasoned HDF Member
#46
11-15-2017, 03:42 PM
#47
11-16-2017, 09:18 AM
The following users liked this post:
SomeOld Biker (11-16-2017)
#48
11-16-2017, 09:40 AM
Seasoned HDF Member
Here is a sound clip of the Fuel Moto Head pipe with the Fuel Moto Hi Roller slip ons and a woods 222 cam on a 2017 CVO Street Glide.
https://www.instagram.com/p/BQVpfUSj...en-by=fuelmoto
https://www.instagram.com/p/BQVpfUSj...en-by=fuelmoto
#49
11-16-2017, 09:49 AM
Road Master
That sounds really nice. Yesterday I rode with a friend that has a new '18 SG CVO. He even has V&H slip-on's and it still sounds so quiet. I am amazed at what the Stage II, header and 4.5" slip-on's did to the sound and performance of my bike.
#50
11-16-2017, 08:27 PM
Intermediate
[QUOTE=fuelmoto;16827207]For those interested we got enough requests so we now offer our Jackpot M8 2/1/2 head pipe with optional HTC ceramic inner/outer coating. Here is an image of the pipe without the heat shields installed.
I wish you guys did this from the onset...wasn't an option when I bought mine from you. That ceramic coating is beautiful.
I wish you guys did this from the onset...wasn't an option when I bought mine from you. That ceramic coating is beautiful.
Thread
Thread Starter
Forum
Replies
Last Post