FP3 Wont download map to bike??
Thread Starter
|
Tourer
Joined: Apr 2007
Posts: 323
Likes: 8
From: YORKSHIRE GB
FP3 Wont download map to bike??
Just bit the bullet and bought V&H Power Duals and a FP3 for bike, hooked up the FP3 to bike and done all the pairing stuff and gone to download a map to bike and it goes through...
Map transfer
Connected to VIN *****(my VIN)
Linking,
Sending stock to server,
Checking for available slots,
Transferring Map
3 seconds later it comes up with "process did not complete verify power on/ engine off. please try again. Code 1301"
Power up the App and it says it's not linked to any bike??
Am I missing something here???
I have V&H Power Duals and Std CVO mufflers (put monster rounds with Power Duals on the map)
Map transfer
Connected to VIN *****(my VIN)
Linking,
Sending stock to server,
Checking for available slots,
Transferring Map
3 seconds later it comes up with "process did not complete verify power on/ engine off. please try again. Code 1301"
Power up the App and it says it's not linked to any bike??
Am I missing something here???
I have V&H Power Duals and Std CVO mufflers (put monster rounds with Power Duals on the map)
Thread Starter
|
Tourer
Joined: Apr 2007
Posts: 323
Likes: 8
From: YORKSHIRE GB
E-mailed Chris Neely at V&H Customer services, he replied within 30 minutes, advised me to make sure I had the latest IOS operating systems on my Iphone (which I had'nt) gave me advice on which map to use, and it all downloaded to bike FIRST TIME of trying.
That for me is EXCELLENT customer service!!! Cheers Chris.
Ady
That for me is EXCELLENT customer service!!! Cheers Chris.
Ady
Former Sponsor
Joined: Apr 2012
Posts: 330
Likes: 180
From: Santa fe Springs, Ca
Just bit the bullet and bought V&H Power Duals and a FP3 for bike, hooked up the FP3 to bike and done all the pairing stuff and gone to download a map to bike and it goes through...
Map transfer
Connected to VIN *****(my VIN)
Linking,
Sending stock to server,
Checking for available slots,
Transferring Map
3 seconds later it comes up with "process did not complete verify power on/ engine off. please try again. Code 1301"
Power up the App and it says it's not linked to any bike??
Am I missing something here???
I have V&H Power Duals and Std CVO mufflers (put monster rounds with Power Duals on the map)
Map transfer
Connected to VIN *****(my VIN)
Linking,
Sending stock to server,
Checking for available slots,
Transferring Map
3 seconds later it comes up with "process did not complete verify power on/ engine off. please try again. Code 1301"
Power up the App and it says it's not linked to any bike??
Am I missing something here???
I have V&H Power Duals and Std CVO mufflers (put monster rounds with Power Duals on the map)
The 1301 error states that the internal chip had timed out, (writing the new map to the internal memory). Upon your upload we noticed that you are running an older version of iOS, (9.2.1). Whereas the current version is 9.3.1. This may be causing an issue. I suggest to update the OS and reflash the bike, also make sure your internet connection has adequate bandwidth and strength otherwise the server could time you out as well. Everything else looked good on our end.
You can also reply to my email as well.
Road Captain
Joined: May 2014
Posts: 682
Likes: 197
From: Raleigh, NC
I have yet to hear of a FP3 fail that wasn't either user error or something quickly fixed by VH.
Come up with a specific problem. Tell VH about it, and give them a chance to respond. Until then, don't sour someone else's experience with your impatience.
GM
Come up with a specific problem. Tell VH about it, and give them a chance to respond. Until then, don't sour someone else's experience with your impatience.
GM
Road Warrior
Joined: Aug 2014
Posts: 1,937
Likes: 320
From: Vancouver, WA
That's right! Rather, they showed there superior service again and the problem had nothing to do with their product either.
Move on..
Move on..
Last edited by RG Pilot; Apr 29, 2016 at 03:03 PM.
Outstanding HDF Member
Joined: Jun 2012
Posts: 2,586
Likes: 175
From: Los Lunas, NM
Sure did, but y'all stay in denial. Ive clearly outined issues ive had. I am entitled to my opinion and voice. This still is America right? As an update i had problems with both units, original and replacement. Technicians werent knowledgeable and none if their suggestions fixed the issues. And again I've had an FP3 on my dyna since 2013. Not user error.
Trending Topics
Club Member
Joined: Jan 2007
Posts: 3,550
Likes: 1,928
From: NE Florida
I talked with the guys from VH at Daytona Bike Week and they even reviewed my FP3 map and made some adjustments while my buddy was getting pipes installed. GREAT bunch of folks at VH.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Road Master
Joined: May 2014
Posts: 962
Likes: 141
From: Idaho
I had a power vision on my 2014 and thought I would try something different on my 2016 so I went with a FP3 and yes I like the FP3 better. Simpler for me and there canned maps seem to be a tad better. We are running 4 of them in my family and they all have been trouble free.
Elite HDF Member
Joined: May 2007
Posts: 4,452
Likes: 798
From: Bear Flag, lower end
Sure did, but y'all stay in denial. Ive clearly outined issues ive had. I am entitled to my opinion and voice. This still is America right? As an update i had problems with both units, original and replacement. Technicians werent knowledgeable and none if their suggestions fixed the issues. And again I've had an FP3 on my dyna since 2013. Not user error.