When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Yes! Very close to mine. Your EQ is set a little lower than on the first 4 bands.
This is what I have. Just wondering if I should lower the bass some more to protect the speakers.
Yes! Very close to mine. Your EQ is set a little lower than on the first 4 bands.
This is what I have. Just wondering if I should lower the bass some more to protect the speakers.
No , I believe you good. I'm putting out all that power of the 600.4 with 2 channels bridged.
No , I believe you good. I'm putting out all that power of the 600.4 with 2 channels bridged.
Very true. I have a couple of questions about tuning.
When you checked the 998 for distortion and found non on USB, how did you have the EQ set?
When the amp gains are set so there is no distortion and you make changes to the EQ on the HU do you have to recheck for distortion at the amp outputs?
Very true. I have a couple of questions about tuning.
When you checked the 998 for distortion and found non on USB, how did you have the EQ set?
When the amp gains are set so there is no distortion and you make changes to the EQ on the HU do you have to recheck for distortion at the amp outputs?
There is debate on that. I set all flat all around sources. When I set amp I used usb as source.Minor eq changes shouldn't affect the output signal into clipping. Now if you maxed the low end out to the top of eq adj or other areas then potential is there. When I go in and swap rca's and check on everything in a few weeks I will recheck output for the hell of it. I'll try it as set now just to see.
There is debate on that. I set all flat all around sources. When I set amp I used usb as source.Minor eq changes shouldn't affect the output signal into clipping. Now if you maxed the low end out to the top of eq adj or other areas then potential is there. When I go in and swap rca's and check on everything in a few weeks I will recheck output for the hell of it. I'll try it as set now just to see.
Those results would be interesting.
Are you moving away form the twisted pair Streetwires to a coax?
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
?
