When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've made a little progress, but work keeps getting in the way (way too much OT right now). Also ran into a small road block, but nothing that should really slow things down. So the bike will sit as it is for a little bit soni can try to get a little fishing in. There is noise coming from the fairing, but nothing is tuned at all, so no video (probably no video until everything is done).
Took advantage of this oddly warm February day in Michigan to put the new bags, side covers, and front fender on.
Made some progress today, but i dont want to cut anymore fiberglass until i bring home my respirator from work. Overall the test fit went perfect.
Looking Good, are those 8's? Is this a PreRushmore? I get to start cutting into my bags next week. (Im nervous as heck) Still trying to decide how I want to cut the hole or holes.
Matt,
Can you show a pic of the outside with the speaker mounted?
Is that ring that you trimmed mounted inside the bag?
After you located that ring and drilled the mount holes, could you then mount it inside and cut it out with a flush cut router bit?
I am trying to decide wether I want to do a full 8" cut out or if I want to do a pattern of 1/4"-3/8" holes.
Matt,
Can you show a pic of the outside with the speaker mounted?
Is that ring that you trimmed mounted inside the bag?
After you located that ring and drilled the mount holes, could you then mount it inside and cut it out with a flush cut router bit?
I am trying to decide wether I want to do a full 8" cut out or if I want to do a pattern of 1/4"-3/8" holes.
Thanks for the info
Pete
This was a Chris Lowe kit that i bought off a member here. The poly speaker mounting rings were pre taped to show where to cut off some edges to clear the shock hump and back angle of the bag. Once i got that where i needed it i placed the speaker in there where i wanted it and marked as many holes as i could to determine where i could get the best meat of the ring. I drilled one hole and then made a couple marks for alignment when i moved the ring to the outside of the bag and then put a screw in to hold in in place, drilled another hole and put another screw in to hold it in place and so on, traced the inside of the ring and then cut a hole to get my jig saw started. Cut a rough hole and then screwed the ring on the inside to use as a guide and then used my router for the finish cut. I'll take some better pictures tomorrow when I do the right side bag for a little clarification on things.
These are Topshop OEM style stretched bags for my 2015 Street Glide. With 8s I was told you will want to do one big hole vs many smaller holes like 6x9s. No idea why lol, but I am not about to doubt Gann and haze on this one.
Last edited by matt76cmich; Mar 7, 2017 at 10:32 PM.
there is a small gasket type ring that covers up the cut and to help seal things off. This was just a test fit, i want ro add treated speaker cloth between the grill and poly speaker ring.
A little more progress today on the right side bag, but having to use generator power since we will be without power till late Saturday. Got the hole cut and will finish when iget some daylight tomorrow.
Here are some completed pictures of the 8" installed. More room left in the bag than i thought there'd be.
The rubber surround was getting hung up on the carpet of the bag.
Amp will be where the wire is going.<br/><br/>More room left than i thought there'd be.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
