When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you are looking for something for your Road King, then check out our systems at Steel Horse Audio. We make them to look like stock on the H-D Road Kings and you can actually hear them at highway speeds, guaranteed. Here are a couple pictures:
Mounted on the handlebars of a Road King
Mounted on the handlebars of a Road King. Matches the spotlights
Mounted on the handlebars of a Road King. Matches the spotlights
I have the Uniq Cycle Sounds system mounted on my crash bars. They are out of business now, but essentially the same system as Steel Horse Audio above. 400 watt amp and no issue hearing at highway speeds with or without the windshield. There is also an app available that lets you adjust your volume to mph, so your speakers aren't jacked to the max at stop lights. I've been happy with this system the last 5 years or so.
That looks good. Is the 400watt system loud enough mounted on the hgwy/crash bars?
Where do you recommend mounting the amp on a '11 RKC?
Originally Posted by Steel Horse Audio
If you are looking for something for your Road King, then check out our systems at Steel Horse Audio. We make them to look like stock on the H-D Road Kings and you can actually hear them at highway speeds, guaranteed. Here are a couple pictures:
Mounted on the handlebars of a Road King
Mounted on the handlebars of a Road King. Matches the spotlights
Mounted on the handlebars of a Road King. Matches the spotlights
I may have to try those speakers Iv been looking for a while now.
If you want to use earbuds Iv tried quite a few and these are by far the best I have found so far.
That looks good. Is the 400watt system loud enough mounted on the hgwy/crash bars?
Where do you recommend mounting the amp on a '11 RKC?
Mine is plenty loud on the engine gaurds. And my pipes are not quiet either. Obviously it is clearer with the windshield on with less wind noise, but I'm riding without the shield most of the time. Not a fan of the look on the bars.
My bike had a perfect sized square hole on the frame under the seat that fit the amp and all excess wires. We mounted one on my buddies, and his went behind a side cover opposite of fuse panel. About to install another on the girlfriends Street Bob, finding a spot on that will be a little more of a challenge.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
Handlebar Speakers
