When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dyna Glide ModelsSuper Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Here's the Kuryakyn Deluxe Smoked Tail Light without the integrated turn signals P/N 4974 http://*******.com/5564l2. It has a light tint and you can see the wiring behind the LED light face plate, so I painted the inside of the lense to hide the wiring and painted around the LED lights to darken the overall look of the tail light.
Also have the Harley Davidson tinted turn signal covers P/N 69304-02 http://*******.com/6n4hj6 with the reflectors painted black.
This is starting to look like what I was after. WS6 and Mascman have the ones I wanted to see. I ride an 07 Denim Streetbob and was hoping to see some on a Streetbob.
This is starting to look like what I was after. WS6 and Mascman have the ones I wanted to see. I ride an 07 Denim Streetbob and was hoping to see some on a Streetbob.
I have them on my 07 FXDB.... I like 'em.
Last edited by SFD_207; Nov 19, 2008 at 10:23 PM.
Reason: never mind... it loaded the pic...
Painting the reflectors black makes a big difference in the look! Does it affect how bright your turn signals are by much?
A little dimmer running light but the signals are still very bright.
I originally checked it out by pulling off the tinted lenses then used a piece of a black trash bag to cover the reflector and put the tinted lens back on (you might want to try that). I used flat black paint, if your concerned with brightness, use gloss black. That should reflect more light than flat black.
i ordered mine from J&P and had problems with the stock bulb touching the inside, melting the lens and burning out the bulb. they gave me a new lens and an LED and no more probs...something to think about
Here's the Kuryakyn Deluxe Smoked Tail Light without the integrated turn signals P/N 4974 http://*******.com/5564l2. It has a light tint and you can see the wiring behind the LED light face plate, so I painted the inside of the lense to hide the wiring and painted around the LED lights to darken the overall look of the tail light.
I had that black one and gave it to my brother because I ordered a red one to go with my new tins.
That looks really nice.
Did you use regular spray paint or plastic paint?
I believe we have some plastic paint in flat black that would probably work.
I think I am going to do something about the plate light since I went sidemount with it.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.