2011 FXDWG Rotate Plate Mount 90 Deg
Thread Starter
|
Intermediate
Joined: Apr 2011
Posts: 47
Likes: 0
From: New York
2011 FXDWG Rotate Plate Mount 90 Deg
My 2011 wige glide has the side license plate mount. It sticks out a bit too far. Has anybody rotated the plate by 90 degrees to make the long direction up and down, minimizing how far it sticks out?
If so, how did you do it? With after market parts?
If so, how did you do it? With after market parts?
Road Warrior
Joined: Apr 2008
Posts: 1,899
Likes: 8
From: Aurora, IL
Here is a vid of one I made for my wifes Dyna. I am actually thinking about making a few more to sell. It wouldnt be for a few weeks though.
http://www.youtube.com/watch?v=yRsesDzobBQ
http://www.youtube.com/watch?v=yRsesDzobBQ
Cruiser
Joined: Mar 2010
Posts: 155
Likes: 0
From: Blue Springs,MO
Ebay $37.95 with free shipping is the one I run
http://cgi.ebay.com/ebaymotors/Licen...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Licen...Q5fAccessories
Outstanding HDF Member
Joined: Dec 2009
Posts: 2,312
Likes: 12
From: Missouri
Hey the OEM plate mount will turn 90 deg if that's how you want it, it is made to go in either position. Take your plate off of the mount and study it a bit and you will figure it out.
Outstanding HDF Member
Joined: Dec 2009
Posts: 2,312
Likes: 12
From: Missouri
Take plate off, remove center bolt, the backing plate is 2 PC, turn the half on the outside half on it's side. Align the two elongated groove circled together and put center nut back in, bolt in your plate, it is now on it's side.
Thread
Thread Starter
Forum
Replies
Last Post
parts eeter
Dyna Parts
5
Jan 20, 2012 07:25 PM
