Shift Shaft Seal
Thread Starter
|
Intermediate
Joined: Apr 2008
Posts: 43
Likes: 0
Shift Shaft Seal
I have a 2008 Dyna Superglide and my Shift Shaft Seal is leaking, I have the maintenance manual for the bike but I cant find the maintenance procedures anywhere in the book to fix it. Does anybody know where it may be in the book? Thanks
Road Warrior
Joined: May 2008
Posts: 1,955
Likes: 6
From: Little Rock
wheres it leaking? between the motor and the primary? thats your shifter shaft seal... if its leaking where the shift rod comes out of the primary thats the tower gasket...
if its the shifter shaft seal, youll need to remove the entire inner and outer primary.if thats the case youll want to replace the inner primary seal as well as the shifter shaft seal.... if its the tower gasket, you only need to remove the outer primary cover...
if its the shifter shaft seal, youll need to remove the entire inner and outer primary.if thats the case youll want to replace the inner primary seal as well as the shifter shaft seal.... if its the tower gasket, you only need to remove the outer primary cover...
Advanced
Joined: Aug 2010
Posts: 72
Likes: 0
From: georgia
SuperFastGlide would you have to pull the entire primary off on a 1990 evo for the same leak or could you just take off the small plate where the shift rod comes out? I have a leak where the shift rod comes out on my 1990 FXR.
Road Warrior
Joined: May 2008
Posts: 1,955
Likes: 6
From: Little Rock
im not sure, maybe the evo forum can help...
Thread
Thread Starter
Forum
Replies
Last Post
