76 FLH Roller rockers keep breaking
Thread Starter
|
Cruiser
Joined: Feb 2022
Posts: 161
Likes: 36
From: Virginia
76 FLH Roller rockers keep breaking
I broke both intakes. I replaced the rear lifter with an S&S, but then the front one broke. I run solid lifters and adjust them so they can just twist in my fingers before tightening them at TDC. I am thinking about going back to the original setup.
Club Member
Joined: Mar 2009
Posts: 66,144
Likes: 51,484
From: Niles Canyon Ca.
Well were the heads set up for the rockers? Correct springs, collars, the seat depth checked and the travel checked & seat pressure set right? That isn't just slap them in and go, sounds like coil binding hard, keep doing it your going to suck a valve.
Thread
Thread Starter
Forum
Replies
Last Post
