I have a 06 softy std efi. I just got doen painting and polishing chrome. had it on my stand took the battery out to remove the oil tank. removed the rocker covers to polish. took all the sheet metal off. removed tires. changed front end, changed tail light to the tri bar led.... My problem is this.... it turns over does not fire... I have checked for loose wiring bad grounds, pinched and have checked all wires for proper ohms and replaced the CPS... PLEASE HELP ME, BEFORE I ROLL THIS THING OUTSIDE AND SET A BLAZE!!!!!!!!!!

 

Gotta be more specific. From what I am reading is your motor turns over but it will not start. If that is the case then you have to narrow it down to either fuel issue or ignition

 

Nice 1st post - maybe you'll get some assistance, if you do a proper intro...

 

stal94gt, itll start but wout spark, I have checked ignition and all fuses

 

Is the fuel pump turning on?

 

QC, yeap all working like it should just not fire to the plugs

 

How strong is the battery?

 

great

 

Okay you say you took the battery out. Check all of the connections, see if you missed anything. Could be as simple as that.

It has happened to others, don't feel bad..

 

If you did nothing else to motor except pull covers than I would go back to square one. I would pull battery again look at all wiring check all the plugs that you might have pulled apart and some you just moved around. If you are sure about it getting fuel. Then I would focus on electric. Do you hear the fuel pump turn on when you turn the bike on?