THE METALS, SUPERIOR, THE RAMP , INNER, STOCK HAD A LITTLE HOLE, BAKER DIDNT? SUBTLE DIFFERENCES IM POINTING OUT, ALSO THERES A LIL BRASS SPACER BEARING/WASHER IN THE THROWOUT BEARING ASSEMBLY, I LIKE THAT, NOT SAME METALS RUBBING ON EACH OTHER, I WILL CALL BAKER AND SEE, WHEN THAT PIECE NEEDS TO BE CHECKED/CHANGED..WHEN YOU HOLE PARTS IN HANDS YOU "FEEL" THE DIFFERENCE FROM WEIGHT, TO JUST BEING DAMM SOLID, NOW THE DOOR ABOVE, CONCEALS PICS ABOVE, AND WHOLE ASSEMBLY!!
STREET DOOR INFO, REALLY HOW COULD I NOT???MY MOTORS A ANIMAL NOW!!!! AND RB RACING IS BUILDING MY NEW SPYDER RACING 2-1 PIPE,45 DEGREE SLASH CUT ENDS...O2 18MM FOR MY WIDEBAND SET EXACTLY HOW DYNOJET SAYS TO WELD BUNGS INTO PIPE IN INSTRUCTIONS, AND HE EVEN IS SETTING THE DEPTH, SO MY WIDEBAND TARGET TUNE/POWERVISION O2 SENSORS, ARE "DEAD ON" AND YES, THE DEPTH OF SENSOR, DOES MAKE A DIFFERENCE!!!, NEXT SEASON, THIS BIKES MY "DREAM BIKE"
Last edited by TOMMYBLAZIN; 11-10-2017 at 11:11 AM.
HOW COULD I FORGET, YES I ORDERED THE BAKER COMPENSATOR AND THIS GUY
THATS A TORQUE CHART 2-4 MORE TQ EACH GEAR WITH ATTITUDE ADJUSTER, NOT BAD
JUST LIKE ABOVE WHEN I SAID I ORDERED THIS OR THAT, WHEN IT COMES, AND I INSTALL THAN ILL SNAP PICS....LOOK TO YOU TUBE TO SEE THE BENIFITS OF THE COMPENSATOR, THEY HAVE A CHEAPER, JUST NOT AS TRUE OPTION, A BDL COMPENSATOR AND A HAYDEN M6 ADJUSTER, JUST THE CHAIN WAS SMACKING TO MUCH, THEY SHOW BOTH WITH PRIMARY COVER OFF, SO YOU SEE WHAT THESE PARTS DO, BUT THE COMPENSATOR DOES ALOT MORE, AND STRONGER AS WELL
Last edited by TOMMYBLAZIN; 11-10-2017 at 11:34 AM.
IF YOU GO HERE YOU CAN ACTUALLY SE THE TQ INCREASES, AND I WISH I BOUGHT HERE, CHEAPER, ALL MY BAKER PRODUCTS, IVE BEEEN BUYING DIRECT, JEFF OVER THERE HAS ME ON A FIRST NAME BASIS!! LOL
wife gone on her annual girls only Great Wolfe Lodge trip, indoor water park, anyway, I get to spending, bought my son his first REAL BMX bike a GT Pro Performer, perfect condition, white mags, blue frame, its a best,
and than I been waiting, this to me, exceeds the current "chin spoilers" on market, actually flows more air into engine, I talked to these guys a bit, theres a lot going son here, also the chrome voltage regulator harley cover, figure this will dress up front a bit, I'm talking with them on the front Nacelle setup, its gonna happen!!!! rather the long chrome bucket everyone does, if I had a bagger, these guys would have my credit card, simply put, I LOVE THERE STYLE, ITS ME 100%
THE ORANGE AND BLACK PIC ON LINK THATS THE NACELLE WERE WORKING ON TO WORK WITH MY BARS, THE NEW ONES COMING FROM UK.....POWDERCOATED BLUE/SHOW CHROME, IN ALL THE RIGHT PLACES....
Last edited by TOMMYBLAZIN; 11-10-2017 at 01:23 PM.
SO IN TALKING WITH BAKER THE ROCKER, WILL NOT LOOK LIKE PIC SHOWN WHEN YOIU TAKE OFF OIL SPINNING WHEEL, AND THERE WILL BE A TAD SIDE TO SIDE MOVEMENT, THATS FINE, AS WHEN ASSEMBLY ALL COMES TOGETHER, THAT WONT, AHPPEN, I MADE 3 CALLS TO VERIFY, I FEEL ITS MY OBLIGATION TO SHARE WITH COMMUNITY AS THIS IS A WELL NEEDED, GREAT, IN-EXPENSIVE MOD, THAT WILL SAVE YOU ALOT OF GRIEF IF THAT BEARING GOES OUT ON THE ROAD SOMEWHERE,
AND IT WAS PUT TO ME, IF YOU DON'T HAVE A GOOD AFTERMARKET PRIMARY CHAIN TENSIONER, ITS NOT A MATTER OF "IF" ITS A MATTER OF "WHEN" SO I TOOK THIS 2 TIMES OUT OF THE EQUATION, FIRST ITS WELL DOCUMENTED, AND KNOWN,
THAT THE HARLEY'S 2007 AND UP, WITH THE "AUTO" ADJUSTING PRIMARY CHAIN , WELL IT KEEPS GOING, CHAIN GETS TO TIGHT, YOU GET SOME SIDE LATERAL MOVEMENT, AND I PROMISE YOU THAT TINY PIECE OF SH@^ HARLEY PUT IN THERE AS A ROLLER BEARING, MY SOIND HOBBY REMOTE CONTROL CARS HAVE HEAVIER DUTY, ROLLER BEARINGS, THERE CALLED THRUST BEARINGS IN THE HOBBY WORLD,.
OK SO PIC TIME
SO WHEN TALKING TO THEM, THIS WAS NOT IN INSTRUCTIONS, THEY HIGHLY RECOMMEND SOME TYPE OF GREASE INSIDE THRUST BEARING ASSEMBLY, WHICH MAKES GREAT SENSE, I LEARNED ALOT TODAY FROM BAKER, AND WHAT DIFFERENT TYPES OF TRANSMISSION OILS DO AND DON'T DO!
SO I USED RED MOBIL ONE SYNTHETIC, IF YOUR FAMILIAR OR NOT, HERES A QUICK FACT, WHEN THIS GREASE GETS EXTREMELY HOT, IT DOES NOT BREAK DOWN INTO RUNNY OIL, AND IN THIS APPLICATION IT WILL NEVER REACH TEMPS, THIS GREASE IS RATRED FOR, THEREFORE, HE SAID "DIP" ASSEMBLY INTO LUBE , LOL, WELL I APPLIED, GENEROUSLY, AND AS YOU SEE I PULLED OUT THINNER ROD, AND LUBED THAT WHOLE ROD, WITH MORE ON EACH END, AS THEY WERE BLACKENED, AND LOOKED AS THEY COULD USE MORE PROTECTION THERE.
I HOPE IM NOT BORING ANYONE, I LOVE TO SHARE FINDING, AND IF I HELP ONE PERSON, WELL ITS WORTH IT, ITS LIKE A PAY IT FORWARD, IF I HAD A NICKLE EVERY TIME ROCKER B HELPED ME, VIA EMAIL, WHATEVER, WELL ID HAVE THE 7-SPEED. LEAVE IT AT THAT, HES A VERY PATIENT, HELPFULL MAN!...
MOVING FORWARD, I HAVE UN OPENED BOXES OF PARTS PARTS ON THE WALL. AGAIN, ONCE THIS IS ALL DONE, MY FRIEND IS BRINGING HIS, :SUPER CAMERA?" HERE, AND WERE GONNA TAKE SOME NICE DETAILED PICS AT WHICH POINT, IT WILL ALLL COME TOGETHER, AS I REALIZE THIS THREADS A TAD SLOPPY, ITS A MECHANICS THREAD, MOSTLY!!!
SO I HAVE THESE SPIKE BANJO'S JUST BE AWARE AS THE ONES ON THE LOWER CALIPER AND LOWER MASTER CYLINDER ARE 3/8" THE ONE COMING OUT OF THE HANDLEBAR IS LARGER, NOT SURE, ILL HAVE TO ORDER, AS ITS A THICKER THREAD!!!....JUST TO NOTS THAT, AS I DIDN'T REALIZE, SO I SNUCK ONE DOWN LOW, NOW I FEEL
GOOD BUILDS ARE IN THE SMALL AND LARGE DETAILS, BUT WHEN I LOOK CLOSLY AT A BIKE, I WOULD NOTICE, WHERE I PLACED THIS SMALL SPIKE BANJO ON THE LOWER MASTER BRAKE CYLINDER, AND IF YOU COMPARE PICS, LOOKS ALOT BETTER THAN THAT UGLY HARLEY SILVER 12 POINT BOLT!!!
ALSO ON THE GRIPS, I HAVE THE WHOLE KNIFE THING GOING WITH LEVERS/MIRRORS ETC, AND SPIKE, WITH OTHERS, SO ON THE TOP LOOKS FANTASTIC, IN MY HUMBLE OPINION NEXT TO THESE CRAZY PRO-1 KNIFE LEVERS, $$$ BUT WORTH EVERY PENNY, BESIDES KILLER LOOK, LOL, THEY ARE COMFORTABLE!!!
I PUT A SIDE BY SIDE WITH STOCK BANJO BOLT AND SPIKE, AND TRIED TO THROW LEVER INTO PIC, AGAIN, THIS IS OFF A IPHONE, SO THE BETTER PICS WILL BE HERE, OHHHHHH 6-7 ,MONTHS, BUT TALK ABOUT TRANSFORMING!!! LOL,
LOTS OF PARETS ON TABLE, HANGING FROM WALL, BOIXES AND PACKAGES UYN OPENED, I HAVE MY WORK CUT OUT, BUT IM DIGGING IN, EVERY PST TODAY IS ME TAKING A NEEDED BREAK
I HAVE OCD, SO I GET DISTRACTED EASILY WHEN I SEE SOMETHING WRONG/DIRTY/NOT LEVE;/NOT PROTECTED, NAME IT, IT HAS TO BE PERFECT!!, SORRY, THATS ME!!!
I MEAN THERE ALL, OVER, ALTHOUGH I HAVE A 2 CA GARAGE SETUP JUST FOR MY MAN CAVE, OLED TV, FRIDGE, COUCH, MY OLD IOLD KITCHEN CABINETS TO STORE STUFF, CARPETING...ITS COMFORTABLE IN THERE....SO WHEN I HAVE FRIENDS OVER THEY HANG ON COUCH , OR HELP, YEA RIGHT....WATCH MY 4K TV I BARELY WATCH, LOL...,.. ALTHOUGH NOW WINTERS COMING, HAVE TO MAKE ROOM FOR MY THER BABY, NEW CORVETTE......AND IM REGISTERED ON A FEW FORUMS SO I BOUNCE BACK N FORTH, I AM DOING A NICE SUPERCHARGER SETUP, MAGGIE TO THE RESCUE AS SHE ALWAYS DOES, BUT IM STAYING ON TRACK, NO VETTE TALK HERE, ALTHO I ORDERED SOME REALLY REALLY COOL STUFF TODAY, OPEN THE DOOR, THE FLOOR SILLS, LIGHT UP IN SKY BLUE LED CORVETTE WITH A STINGRAY, BADASS, GOT THE IDEA FROM A MERCEDES CLK430 I USED TO OWN BENZ DID THAT AS A OPTION....!!!! HAHAH OK DONE
Last edited by TOMMYBLAZIN; 11-10-2017 at 04:34 PM.
It all looks great Tommy and I'm impressed as all get out. I wish I understood what it all means. When it is finished, what will you achieve from a performance perspective?
It all looks great Tommy and I'm impressed as all get out. I wish I understood what it all means. When it is finished, what will you achieve from a performance perspective?
yes, I'm even taking it to another level of performance, being modded motor, plus I'm doing MORE WORK TO HEADS OVER WINTER, CHECK THIS out, this was gonna be a surprise...think our grenade ignition coils
11-10-2017, 11:06 AM
