billet headlap shell

Reply Subscribe

Thread Tools

Search this Thread

Mar 12, 2006 | 07:30 PM

L night train

Thread Starter

Advanced

Joined: Feb 2006

Posts: 68

Likes: 0

From:

billet headlap shell

any body using a stock headlamp with the large harley headlamp shell.If so does the harley logo sit straight.I have no instructions on how to remove headlamp

Mar 12, 2006 | 10:13 PM

Maddogs700srx

Cruiser

Joined: Feb 2006

Posts: 143

Likes: 0

From: New Hampshire

RE: billet headlap shell

Are you refering to the Nacelle?

Mar 13, 2006 | 10:10 AM

L night train

Thread Starter

Advanced

Joined: Feb 2006

Posts: 68

Likes: 0

From:

RE: billet headlap shell

no it is the large headlamp shell out of the harley big book

Mar 24, 2006 | 06:56 PM

L night train

Thread Starter

Advanced

Joined: Feb 2006

Posts: 68

Likes: 0

From:

RE: billet headlap shell

anybody

Mar 25, 2006 | 02:25 AM

nightpork

Advanced

Joined: Oct 2005

Posts: 97

Likes: 0

From: Brisbane, Queenlsnd, Australia

RE: billet headlap shell

I put the billet headlight shell on mine using the original headlight. It's pretty tricky to get the logo straight but it can be done. Took me #@!$*** ages to fit it properly but I love the result.

Mar 25, 2006 | 02:12 PM

L night train

Thread Starter

Advanced

Joined: Feb 2006

Posts: 68

Likes: 0

From:

RE: billet headlap shell

how do you get the trim ring out ,i dont have the instructions.THANKS FOR YOUR HELP

Mar 26, 2006 | 11:17 PM

nightpork

Advanced

Joined: Oct 2005

Posts: 97

Likes: 0

From: Brisbane, Queenlsnd, Australia

RE: billet headlap shell

Quote:

ORIGINAL: L night train

how do you get the trim ring out ,i dont have the instructions.THANKS FOR YOUR HELP

Sorry didn't answer sooner I was away for the weekend! Anyway, back to the headlight. It's very hard to get the trim off without damaging it. In the instructions, it says you should use two pennys and gently lever them side to side. I tried this but damaged the trim! [:@] I then used two plastic screwdrivers and a lot of patience. DO NOT use ordinary screwdrivers, use some thing made out of hard plastic. Be very careful as this will take you a long time. Then once you line it up and put it back in, it's in! You don't want to be trying to take it off again! God help me if I ever have to change my headlight bulb! If you want, I can try to find the instructions and give you more word for word instructions.