Calling all blackout nuts...
Thread Starter
|
Cruiser
Joined: May 2009
Posts: 125
Likes: 0
From: Australia
Calling all blackout nuts...
I'm struggling to find a good supplier for black bolts or black bolt caps for the Rocker, most of the rest of the bike is now blacked but I think it's the small details that make all the difference.
Do you know a good parts supplier for black bolts or caps?? Any help much appreciated.
More pics on my blog: MyRockerFXCW.com
Do you know a good parts supplier for black bolts or caps?? Any help much appreciated.
More pics on my blog: MyRockerFXCW.com
Last edited by kanunski; Sep 26, 2009 at 05:54 AM. Reason: changed the photo
Tourer
Joined: May 2009
Posts: 430
Likes: 2
From: ChiTown burbs
http://www.mcmaster.com/#socket-cap-screws/=3shkvz
pick the type of bolt your looking for, then pick your finish.
go straight to the source.... if you know what your looking for.
pick the type of bolt your looking for, then pick your finish.
go straight to the source.... if you know what your looking for.
Last edited by dub976; Sep 25, 2009 at 07:30 PM.
Cruiser
Joined: Jan 2008
Posts: 161
Likes: 1
From: Ohio
Trending Topics
Tourer
Joined: May 2009
Posts: 273
Likes: 0
From: everywhere
Chaz I always wondered why you had not done yours.
You are the cheap mods and do it your self type.
I personal feel they do drowned away when all black.
That is why I am blacking mine out, I did not like the way the bolts attracted attention.
the contrast wasn't real bad, but it does look a lot better when you look at your motor and see motor, not bolts
I am using Rattle can on mine...
I take every other bolt off, do them...
put them back on...
repeat same process for the next set.
No new gaskets needed.
chris
You are the cheap mods and do it your self type.
I personal feel they do drowned away when all black.
That is why I am blacking mine out, I did not like the way the bolts attracted attention.
the contrast wasn't real bad, but it does look a lot better when you look at your motor and see motor, not bolts
I am using Rattle can on mine...
I take every other bolt off, do them...
put them back on...
repeat same process for the next set.
No new gaskets needed.
chris
Last edited by 09_NightRider; Sep 25, 2009 at 09:50 PM.