ordered br customs
Thread Starter
|
Road Master
Joined: Oct 2007
Posts: 1,105
Likes: 1
From: Dago
ordered br customs
placed my order tonite for some BR Customs bars for my nitetrain.
I ordered the 1 1/2 inch broomstick tbars. They are 28 inches wide, i went with a 4 inch riser, and 2 inches of pullback just to give a slight bend for the wrists.
Excellent customer service. He walks through every detail to make sure the exact bars you want and the exact measurements.
I went with a 4 inch rise to have that slammed/drag bike look; 28 inches will make these bars perfect for lane splitting here in cali and still give me enough width for leverage/countersteering...
the 1 1/2 inches thick will look good with the Marzocchi inverted forks and the ridewright fat 50 front rim and beefy front tire
pic attached is the bars with a 8 inch riser
I ordered the 1 1/2 inch broomstick tbars. They are 28 inches wide, i went with a 4 inch riser, and 2 inches of pullback just to give a slight bend for the wrists.
Excellent customer service. He walks through every detail to make sure the exact bars you want and the exact measurements.
I went with a 4 inch rise to have that slammed/drag bike look; 28 inches will make these bars perfect for lane splitting here in cali and still give me enough width for leverage/countersteering...
the 1 1/2 inches thick will look good with the Marzocchi inverted forks and the ridewright fat 50 front rim and beefy front tire
pic attached is the bars with a 8 inch riser
Thread Starter
|
Road Master
Joined: Oct 2007
Posts: 1,105
Likes: 1
From: Dago
Scary was after orderin i was lookin at the 1 1/2 inch Chimp Bars. But i like the straight T-bars better i think they will flow with the bike better.
Thread Starter
|
Road Master
Joined: Oct 2007
Posts: 1,105
Likes: 1
From: Dago
bars should be here on Wed Im hopin. I gotta get them powdercoated still but lookin forward to them
They are 28 inches end to end
4 inch straight risers
2 inches of pullback
1 1/2 inches thick.
They are 28 inches end to end
4 inch straight risers
2 inches of pullback
1 1/2 inches thick.
Road Master
Joined: Jun 2008
Posts: 1,104
Likes: 0
From: Malvern, Pa
Trending Topics
Thread Starter
|
Road Master
Joined: Oct 2007
Posts: 1,105
Likes: 1
From: Dago
bars arrived friday
off t opowdercoater on mon/tues
have them mounted by friday so i can ride Sat the 15th on Officer Down Ride
off t opowdercoater on mon/tues
have them mounted by friday so i can ride Sat the 15th on Officer Down Ride
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Thread Starter
|
Road Master
Joined: Oct 2007
Posts: 1,105
Likes: 1
From: Dago
ok here are some "phone" pics of the bars being installed on my nitetrain. These bars are "perfect" for me. They are the perfect width and will be incredible for lanesplitting here in socal.
My Legends suspension gets returned to me in the mornin and then the bike will be back together in time for a quick ride this weekend....
My Legends suspension gets returned to me in the mornin and then the bike will be back together in time for a quick ride this weekend....