Help checking ECM Stock or tuner
Thread Starter
|
Road Master
Joined: Feb 2011
Posts: 818
Likes: 0
From: Battle Creek, MI
Help checking ECM Stock or tuner
I pulled the seat on my 04 Heritage and took out the four hex bolts to pull the cover. I cannot seem to get the square out of the cover to see the front.
I am not mechanically inclined so did not want to force anything, so just put it all back together...I would like to know if there is a trick to getting the ecm out of the louvered look cover.
I am not mechanically inclined so did not want to force anything, so just put it all back together...I would like to know if there is a trick to getting the ecm out of the louvered look cover.
Road Master
Joined: Apr 2009
Posts: 754
Likes: 24
From: Southern Maine
The louvered covered module is the ECM. They aren't designed to open. If you have an aftermarket ECM, it will be attached in series with the stock ECM cable and usually mounted on top of the stock unit or behind the rear splash guard.
Seasoned HDF Member
Joined: Oct 2006
Posts: 5,977
Likes: 85
From: Nevada
Yes, you need to find out from the dealer if it has been flashed. No, you do not need to put it back to stock if it has been. If you buy a PC from Fuelmoto just tell them if it has a flash and they will load an appropriate map. Dynojet also has maps for flashed ecm's.
Thread
Thread Starter
Forum
Replies
Last Post
Manobeer
Ignition/Tuner/ECM/Fuel Injection
1
Apr 9, 2012 08:06 PM
hillcountryflt
Ignition/Tuner/ECM/Fuel Injection
9
Oct 26, 2011 05:54 PM
