cheap console pouch
Thread Starter
|
Advanced
Joined: Feb 2012
Posts: 94
Likes: 0
From: boston
cheap console pouch
hey guys, i was pissed that HD gets $100 for console panel with pouch, did a little looking around, just wanted to share a quick mod. took off my tank panel and bolted up HD part# 45789-92, they call it a padlock pouch for $30. used some flat panel bolts that are flush, looks great, nice and big, cheers, also covered up a few holes i had drilled prematurely
Thread Starter
|
Advanced
Joined: Feb 2012
Posts: 94
Likes: 0
From: boston
i just put a couple strips of gorilla tape along the back. strong stuff, if you havent tried it. the way the panel is made they roll the edge to the back, thus making bolts not even touch the tank, but always better safe, pouch looks better than i could imagine on the bike
Club Member
Joined: May 2007
Posts: 145,895
Likes: 821
From: 40 miles Northeast of Indy..
There are some really good contact glues U might have used instead of the bolts.
I used glue to hold the leather dash insert I made and all my fringe on, just make sure it not water based type so if it gets wet it wont come loose.
I used glue to hold the leather dash insert I made and all my fringe on, just make sure it not water based type so if it gets wet it wont come loose.
Thread
Thread Starter
Forum
Replies
Last Post
