side mount licens
Tourer
Joined: Nov 2005
Posts: 284
Likes: 1
From:
RE: side mount licens
You could paint this one black
http://cgi.ebay.com/ebaymotors/LEFT-...92130753QQrdZ1
http://cgi.ebay.com/ebaymotors/LEFT-...92130753QQrdZ1
Road Master
Joined: Feb 2007
Posts: 760
Likes: 0
From:
RE: side mount licens
Sorry dude I bought mine from kurayakyn, and it's chrome with l.e.d. light's above it, but if ride at night could help cage's see you better because you still have rear light and brake light and this is extra precaution because it work's like your tail light , normal light and get's bright when you brake, and to me what's cool is lower row of light's or blue and then you have 5 or 6 row's of red above that just to me look's cool and may help you be seen better, just my 2 or 3 cent's.GOOD LUCK.
[IMG]local://upfiles/24725/1F5D0706C2A4426480754495A514155B.jpg[/IMG]
[IMG]local://upfiles/24725/1F5D0706C2A4426480754495A514155B.jpg[/IMG]
Tourer
Joined: Feb 2006
Posts: 399
Likes: 0
From:
RE: side mount licens
Heck, just make one! That's what I did for my Train. I used a piece of angle iron and a piece of heavy (14- or 16-guage) sheet metal I had. I cut the sheet the same size as the plate for backing, and used the angle to add strength and attach to the bike. I also put a black plate frame to finish it off. The whole thing bolts on using one of the lower-belt-guard bolts. At this point, I still don't have a license light, but I'm looking at the options for that. The whole thing took me about an hour to design and fabricate, and cost about $6 for the plate frame.
If I had good pics of it, I'd post 'em. Sorry on that score.
If I had good pics of it, I'd post 'em. Sorry on that score.
3rd Gear
Joined: Jan 2007
Posts: 7
Likes: 0
From:
RE: side mount licens
Hey, I just made one too. It cost me about 5 bucks and I think it looks awesome!! There are two wholes at the bottom of your frame in front of your swing arm. I made a bracket that mounts to those whole. I drew the shape that I wanted and cut it out of a sheet of metal, then I cut a backing plate out and welded the two together. I cleaned it up and painted it black. It looks really cool. I will post a picture tomorrow so you can see what it will look like.
Mike
Mike
Thread
Thread Starter
Forum
Replies
Last Post
smokinfromshootin
General Harley Davidson Chat
7
May 28, 2011 10:36 PM
