Need Help - Adding 4 inch pull-back risers
Thread Starter
|
Tourer
Joined: Mar 2007
Posts: 375
Likes: 1
From: Jackson NJ
Need Help - Adding 4 inch pull-back risers
I just tried to fit 4" pullbacks on a 1200L. All cables seemed to be long enough except the two going to the speedo and the idiot lights. I need about another 2 inches on those cables. Before I pull off the tank to look at them I figured I'd ask if there was any point in looking or do I just need to get new cables?
Cruiser
Joined: Apr 2007
Posts: 211
Likes: 0
From: massapequa, N.Y.
RE: Need Help - Adding 4 inch pull-back risers
Tiger , try taking off the tank and running the harness between the tank and the frame. I put 6" risers and did it that way. Plenty of room . Where are you putting the speedo ? On top or are you swinging it over the tank ? I got a new bracket and put mine over the tank. try it & give a shout back. Phil...
Cruiser
Joined: Oct 2007
Posts: 173
Likes: 0
From: South Philly
RE: Need Help - Adding 4 inch pull-back risers
I agree with kardoc i remount the speedometer in the same spot once the tank got lifted i had enough room to do whatever i wanted with it and since the tank wasoff i got a nice paint job from A&M Auto Body since 1981
Thread Starter
|
Tourer
Joined: Mar 2007
Posts: 375
Likes: 1
From: Jackson NJ
RE: Need Help - Adding 4 inch pull-back risers
Thanks guys. There was enough cable under the tank. Here are a couple of pictures with the risers.
[IMG]local://upfiles/26319/2800BC02CC5E4ECF89671AA612724337.jpg[/IMG]
[IMG]local://upfiles/26319/4B3DB11B7A974992B09EF2F41931F734.jpg[/IMG]
[IMG]local://upfiles/26319/2800BC02CC5E4ECF89671AA612724337.jpg[/IMG]
[IMG]local://upfiles/26319/4B3DB11B7A974992B09EF2F41931F734.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
thegaspesian
Sportster Models
22
Jan 13, 2011 04:17 PM
