When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks again for doing this compare of all cams. I took all the dyno charts and put data into a spreadsheet to compare. If anyone is interested, here is the sheet:
This spreadsheet it great. Thanks for putting it together totalgearhead! Makes comparing them a lot easier. One questions is are you able to make it where a person could just select like 2 or 3 or whatever number and have them displayed in the graph instead of all of them at once? The graph is unreadable with all of them on it. It would be nice to select a few of them and see them together. I know you did this all on your time but just an observation. Thanks to Fuel Moto as well for doing this.
Thanks again for doing this compare of all cams. I took all the dyno charts and put data into a spreadsheet to compare. If anyone is interested, here is the sheet:
If you click on his link you can download the data to a spreadsheet and do the compares.
I have it opened up. I am not able to download it as a spreadsheet. I am unable to deselect any cams on the dyno curve chart so that I can compare a few of them. It is probably possible I just cannot get it to work.
I have it opened up. I am not able to download it as a spreadsheet. I am unable to deselect any cams on the dyno curve chart so that I can compare a few of them. It is probably possible I just cannot get it to work.
I have not published a google sheet before and did not know it wasnt editable? Try this link instead:
What bump in HP and torque do you generally see with Fuel Moto level B heads? Looking to do a 103, level B heads and CR 570-2. With only 30,000 not looking to increase bore.
What bump in HP and torque do you generally see with Fuel Moto level B heads? Looking to do a 103, level B heads and CR 570-2. With only 30,000 not looking to increase bore.
