As we speak...
Performance and comfort are on the way... With just over 31,000 miles into my 2018 CVO SG I'm ready to make a few additional tweaks. I love this bike, and plan to love it a whole lot more in the very near future.
Performance
Quieter valve-train, bit more "soul", cooler-running engine and some more get-up and go. Here are the few goodies on the install list this week:
Comfort
After swapping the stock rear 12" shocks for 13" Pro-Actions, it's time to get serious. I am now moving to a new Legends suspension all around
Work started today. Should be wrapped-up by the weekend, which would be great considering it's looking to be 65 degrees Saturday / Sunday. Then I've 2+ weeks planned down south around Thanksgiving and can't wait to get some miles in on the new ride.
Performance
Quieter valve-train, bit more "soul", cooler-running engine and some more get-up and go. Here are the few goodies on the install list this week:
- V&H Power-duals, Torquer 450 mufflers
- Zipper's Redshift 468 cam
- Fuel-Moto Quickee Push-rods
- Hy-Lift Johnson Lifters B-2313SE
- S&S Cycle Billet Tappet Cuffs
- New H-D Cam Tensioner
- Power Vision Tuner
- Power Vision Target Tune (wide-band sensors)
Comfort
After swapping the stock rear 12" shocks for 13" Pro-Actions, it's time to get serious. I am now moving to a new Legends suspension all around
- Revo ARC Remote Reservoir, 13" (rear)
- AXEO FLH (front)
Work started today. Should be wrapped-up by the weekend, which would be great considering it's looking to be 65 degrees Saturday / Sunday. Then I've 2+ weeks planned down south around Thanksgiving and can't wait to get some miles in on the new ride.
Nope. Harley changed the shaft retention method on the M8.
Did I mention they had my products in their hands when designing the M8?
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
Did I mention they had my products in their hands when designing the M8?
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________

NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!

Nope. Harley changed the shaft retention method on the M8.
Did I mention they had my products in their hands when designing the M8?
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
Did I mention they had my products in their hands when designing the M8?
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
Trending Topics
I’ve heard great things about the B-2313SE lifters being quiet. Also expecting the attention going into the rebuild will help ensure proper tolerances.
The patient is currently on the table... Cam chest is open...
The patient is currently on the table... Cam chest is open...
I plan to do that once I have then off the bike. I’m hoping I can return them for repair / replacement if warranted. It was my intention to upgrade to the Legends front and rear regardless.












