Complete front fork Assembly
My neighbor was given an '02 EGC by his nextdoor neighbor's widow (He was thrown from bike after car pulled out in front of him). The bike never laid down as it was stuck in the car but need a complete front fork assembly. Any ideas on where to find a used one?
I'd be real careful about just putting a new front end on. With that kind of impact it is very likely the frame is tweaked. They can be straightened, you need to find a good frame shop to checkit and do the work. Be careful and Good Luck.
This guy is a body man. The frame is a little tweaked it looks like it can be straightened, but he can get the frame thru moco he was just wanting to save a few bucks on everything else.
ORIGINAL: Tulsa Rambler
I have a set of trees, tubes, lower legs, and wheel off of a 99 ultra that I would sale for $1000.00 plus shipping.
eddie
I have a set of trees, tubes, lower legs, and wheel off of a 99 ultra that I would sale for $1000.00 plus shipping.
eddie
Just to let you know the 99 has a 3/4" axle and the '02 uses 1" axle. Unless you are going to replace the rotors, wheel and brakes you are going to need a donor from a 1" axle bike.
I have an air shocked with a stock frontr end. 100% streight & a 1" axled lower legs. It will fit 2002 & up only. Like brand new. A take off on a bike we put our front inverted forks on. You got my toll free # from my web site.
Thread
Thread Starter
Forum
Replies
Last Post




