takeing off ignition switch
Thread Starter
|
3rd Gear
Joined: Jul 2007
Posts: 7
Likes: 0
From:
takeing off ignition switch
I am takeing my inner fairing off for paint, my problem is that I can't seem to get the ignition switch to come off, what's the process to getting this off.
2006 Street Glide
Black Cherry
Thanks Ed
2006 Street Glide
Black Cherry
Thanks Ed
Seasoned HDF Member
Joined: Feb 2007
Posts: 10,602
Likes: 721
From: Bellevue, NE
SG nailed it. It will seem pretty simple once you get it. I was very careful not to move anything when I pulled mine because of the stories I'd read about not being able to get everything lined up. When it came time to reassemble it almost fell back together.
Extreme HDF Member
Joined: Apr 2006
Posts: 10,449
Likes: 46
From: Roswell, GA
Trending Topics
Thread Starter
|
3rd Gear
Joined: Jul 2007
Posts: 7
Likes: 0
From:
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Extreme HDF Member
Joined: Apr 2006
Posts: 10,449
Likes: 46
From: Roswell, GA
Eddy, I made the suggestion only because my impression is that about 50% of the "help" posts are answered with information in the Service Manual. Also, unless you know how to remove the clutch cable and adjust it correctly when putting the bike back together, ditto the throttle and idle cables removal and reinstall, etc., you will benefit from the step-by-step instructions for inner fairing removal and installation in the SM--I know I did when I installed my painted inner fairing.
Good luck with your project.
Good luck with your project.
