Problem with Power Vision (Solved)
Thread Starter
|
Tourer
Joined: Mar 2008
Posts: 400
Likes: 3
From: SouthWest, CA
Problem with Power Vision (Solved)
I mounted my Power Vision this weekend so I could see how it worked on the bike. I set it up to display six gauges, one of them was the gear indicator which is kinda cool along with the rest of them.
It was weird though, because every time I would stop, the indicator would show "0". I was thinking to myself, "that's freakin' weird, I'm in 1st and it's showing 0."
All kinds of thoughts were going through my mind like "it might be defective," "I've got it set wrong," "it's connected wrong"...
At least until... I realized the indicator would show "0" every time I pulled the clutch in to switch gears or hold it in first...
PROBLEM SOLVED! haha... You guys already knew this was coming, huh?
The Power Vision is a cool gadget! I'll probably try to do some data log runs and see how they come out.
It was weird though, because every time I would stop, the indicator would show "0". I was thinking to myself, "that's freakin' weird, I'm in 1st and it's showing 0."
All kinds of thoughts were going through my mind like "it might be defective," "I've got it set wrong," "it's connected wrong"...
At least until... I realized the indicator would show "0" every time I pulled the clutch in to switch gears or hold it in first...
PROBLEM SOLVED! haha... You guys already knew this was coming, huh?
The Power Vision is a cool gadget! I'll probably try to do some data log runs and see how they come out.
Thread
Thread Starter
Forum
Replies
Last Post
Impala_ss
Ignition/Tuner/ECM/Fuel Injection
1
Mar 21, 2015 01:08 PM
