Rotor torque specs
#2
My 2010 FLHX service manual calls out 16-24 ft-lbs for the stock rotors.
The chrome hardware bolt kit instructions used for my agitators state the following:
2. Place a few drops of Loctite
® 243 (blue) on the threads of
the
new chrome screws from the kit. Re-install the brake
assembly. (00319b)
disc using ONLY the new chrome screws. Torque the
screws to 24 ft-lbs (33 Nm).
screws to 24 ft-lbs (33 Nm).
Do not re-use brake disc screws. Re-using disc screws
can result in torque loss and damage to rotor and/or brake
can result in torque loss and damage to rotor and/or brake
assembly. (00319b)
Thread
Thread Starter
Forum
Replies
Last Post