Getting ready to do a brake job on my 2000 Ultra, and for the life of me, I can't find a 12 point, 1/4 inch, 3/8's drive socket. Anywhere to get one online without paying a small fortune on shipping?

 

use a box end wrench,a lot of those are 12 point.wrap the other end with duct tape just in case.

 

That's what I use.

 

3/8 x 1/4 addapter use 1/4 drive socket.....

 

Sears. $20 for multiple sizes...

 

had the same problem I ended up finding a 1/4" drive thin wall socket at home depot for $7.00.

Good luck and socket must be thin wall

 

Are you talking about using it to pull the small screws that hold the pads in caliper?
I use a 12 point metric myself. I think a 9 or ten.
But eitherway, just get a 1/4 inch drive ratchet and socket.
They aren't that tight.

 

10mm twelve point is what it takes.........

 

Go with the 12 point box end wrench. I got mine at NAPA for about $3.

 

Why's it gotta be a 3/8 drive? A Craftsman 1/4 drive 1/4" 12 pt socket is what I use.